Fat Arnie
New Member
- Messages
- 428
Whats causing my ERROR LIGHT
I've had the error light ******* for around a month and today set about trying to find out why.
With the aid of an assistant, I have removed each actuator, confirmed they move freely in each direction, and confirmed the little gear is not chewed.
I have spun the control in the damper and it moves freely through around 90 degrees on all 4 dampers.
If you place a hand of the actuator when fitted, and turn on the ignition, you can feel all 4 dampers initialising.
I have also removed and opened up the Vertical Movement Sensor and all looks good inside (not fallen apart internally or water damaged etc)
Pressing the sport button definitely hardens the ride.
So what else could it be?
Thanks
I've had the error light ******* for around a month and today set about trying to find out why.
With the aid of an assistant, I have removed each actuator, confirmed they move freely in each direction, and confirmed the little gear is not chewed.
I have spun the control in the damper and it moves freely through around 90 degrees on all 4 dampers.
If you place a hand of the actuator when fitted, and turn on the ignition, you can feel all 4 dampers initialising.
I have also removed and opened up the Vertical Movement Sensor and all looks good inside (not fallen apart internally or water damaged etc)
Pressing the sport button definitely hardens the ride.
So what else could it be?
Thanks
Last edited: