Repair the window mechanism (4200 Coupe 2005)

[range83]

Hello,
Really, it does not stop to make his own

I heard loud noises when closing the window. Once down, she did not want to go back. Cause the axis of the mechanism broke.

I found two links that helped me enormously

http://www.maseratilife.com/forums/coupe-spyder-gs/9482-door-disassembly-ultimate-speaker-2.html
http://www.sportsmaserati.co.uk/showthread.php/327-Passenger-window-dip-function-%284200%29?highlight=electric+window


Removal of door trim



Seen in the top left broken part


He mechanism is bent, it will be necessary to straighten


Teeth were broken during the operation. I welded and ground off the new teeth




The plan of the piece to the turner


The adjustment







Welding


Mechanism repaired ready to ride


excuse me for my english ...

I hope my thread will help someone. It cost me € 25 to make the axis.

Thierry

 

[safrane]

Great work and nice to see some one trying a fix rather than buying a new unit.

 

[range83]

thank you,

I like to understand and try to repair when this is possible

 

[Emtee]

That's great information range83. Thanks for taking the time to photograph your repair.

 

[MAF260]

A very impressive repair. Well done.

Your English is perfectly good.

 

[Parisien]

Excellent....vive la France!


P

 

[range83]

Excellent....vive la France!


P

Yesssss,

Merci a toi.... puis quand tu reviens dans le sud de la France fais moi signe....

Thierry ;-)

 

[Parisien]

..... merci Thierry ...... vais à Nice en Avril ..... mais en avion!


P

 

[range83]

..... merci Thierry ...... vais à Nice en Avril ..... mais en avion!


P

Tiens moi au courant, si je suis disponible on pourrait se rencontrer. Tu as dejà les dates ? car les deux dernières semaines je bosse 7 jours sur 7......

Thierry

 

[hodroyd]

Thiery,
Merci, that was excellent work and well done on the repair..!!
Cheers
R

 

[conaero]

Excellent work.

Can you explain a little more how you repaired the teeth? Did you weld in new metal and then cut the teeth yourself or did use a salvage part?

What was the point of the nut you made on the axis?

 

[CatmanV2]

Nice fix. A little beyond my ability and tools, but very impressive.

C

 

[Parisien]

Tiens moi au courant, si je suis disponible on pourrait se rencontrer. Tu as dejà les dates ? car les deux dernières semaines je bosse 7 jours sur 7......

Thierry

Was just back from London last night.

ok ... vais vérifier quand je rentre à la maison ce soir ... merci!


P

 

[hodroyd]

It looks like the teeth were rounded and they were repointed with a drimmel, is that correct..??

 

[Parisien]

We are in Nice from the 9th to 13th April


P

 

[hodroyd]

Lucky you Frank & Mrs P.

 

[range83]

Excellent work.

Can you explain a little more how you repaired the teeth? Did you weld in new metal and then cut the teeth yourself or did use a salvage part?

What was the point of the nut you made on the axis?

Yes I welded in new metal. Then creates teeth with a Dremel.

 

[range83]

It looks like the teeth were rounded and they were repointed with a drimmel, is that correct..??

Yes.

Thierry

 

[range83]

We are in Nice from the 9th to 13th April


P

Génial, il faudra essayer de se rencontrer alors......

Thierry

 

[Parisien]

Pourquoi pas ....... peut-être la semaine avant ..... convenir d'une heure et le lieu ...... merci!

P