conaero
Forum Owner
- Messages
- 34,639
Well, had the Alfa Brembo's in many bits strewn across the garage floor. Despite new seals and dust covers previously, they have seized again.
I spoke to the seal supplier today and has suggested to remove the seals completely and make sure the pistons drop into the bores. I says that despite me saying there is no corrosion, I should remove the seals and check for corrosion underneath the seal as it sounds like they are sitting too proud.
Going for another set of seals, from a different supplier.
I will, reports back in due course.
I spoke to the seal supplier today and has suggested to remove the seals completely and make sure the pistons drop into the bores. I says that despite me saying there is no corrosion, I should remove the seals and check for corrosion underneath the seal as it sounds like they are sitting too proud.
Going for another set of seals, from a different supplier.
I will, reports back in due course.