Steve4200
Member
- Messages
- 198
Has anyone got a "picture guide" on how to reach the PCB that the speedometer/odometer fits to.
I have managed to remove the cluster and remove the nuts holding the speedo and rev but it seems tight if trying to remove them from the front.
Need to check the soldering on the pcb under the white plastic cover , that the red , black and yellow wires go into.
The speedo signal is fine but will not working on the dash.
Kind regards
Steve
I have managed to remove the cluster and remove the nuts holding the speedo and rev but it seems tight if trying to remove them from the front.
Need to check the soldering on the pcb under the white plastic cover , that the red , black and yellow wires go into.
The speedo signal is fine but will not working on the dash.
Kind regards
Steve