Xenon sensor help

[conaero]

I have just reassembled my front xenon sensor and I am a little concerned that the tie rod is very close to the anti rollbar.

Can someone just chech for me?

If you turn your wheels hard left and look into the passenger side front wheel arch calipers side can you tell me if the tie rod (item 17) faces outwards or inwards.....can you see the nuts or are they facing inwards as n the pic:

Bigger pic:

http://http://www.eurospares.co.uk/userImages/024/Large/024_045.gif

 

[CatmanV2]

Hmm, not quite sure what you're asking, and not going to look in the dark, but on mine the nuts are inboard, so the 'bolts' on the tie rod point in towards the centre line of the car.

Make sense?

C

 

[conaero]

Thanks cat that has answered my question...yours is the same as the drawing then. Figures.

 

[CatmanV2]

Yep. I don't recall it being too close to the roll bar. Happy to help

C

 

[conaero]

It's probably because the car is up on a ramp and the suspension is at full droop.

 

[CatmanV2]

Could well be. At least you can check it when it's back on the ground.

C