I have a 4200 with a manual gearbox.......during yesterdays drive the mirrors stopped adjusting to the "reversing" position, although there was the usual "beep" in the car when reverse was selected. There is power to the mirrors, as they fold when selected but the mirror (left and right) do not respond to the command to change position. Can't identify a fuse specifically for mirrors in the original handbook. Is there a central controller triggered by selection of reverse which also has manual control of the mirror position or is there a specific fuse for the angular adjustment motors ?
Unrelated or not..............at the same time the electric switch control for the drivers seat stopped functioning - well almost. The only one working is the lumbar support - all others are dead. Can't believe both motors have failed at the same time. There is 12 volt into the seat and the passenger seat is works fine. The main fuse to seats is fine. The only other related fuse is for ancillaries (including "seats") eg petrol flap and boot release but both these are functioning.
Wild suggestion...........is there a common "memory module" for seats and mirrors which has failed ?
Any other clues ?
Thanks for all responses.
Unrelated or not..............at the same time the electric switch control for the drivers seat stopped functioning - well almost. The only one working is the lumbar support - all others are dead. Can't believe both motors have failed at the same time. There is 12 volt into the seat and the passenger seat is works fine. The main fuse to seats is fine. The only other related fuse is for ancillaries (including "seats") eg petrol flap and boot release but both these are functioning.
Wild suggestion...........is there a common "memory module" for seats and mirrors which has failed ?
Any other clues ?
Thanks for all responses.