TheYoungconnoisseur
New Member
- Messages
- 77
So I painted my calipers while doing SS brake lines when doing my suspension and forgot about it and the res ran bone dry dripping out of the hard lines when I have the calipers and lines off for over a week. using my pressure bleeder I have run 2 full bottles of fluid thru the right rear, left rear right front left front in multiple laps around the car like Ive done dozens of times on my race cars and have 8 diff hoses and bottles at each corner so running around is no problem to constantly do it.... I also tap all the lines and hit the calipers to facillitate disturbing the bubbles loose....
HOWEVER......... its still spewing tons of micro bubbles especially out the longest line, the right rear inside and outside of the caliper. it would only make sense that there is a leak somewhere with i checked and there isn't, i cleaned everything to let sit overnight just incase but the other more concerning possibility is the abs pump......
I dont know what to do now at this point, I've got absolutely no brake pedal at this point and no electronics.... also it is displaying suspension warning still after 10+ ignition cycles I thought it would have gone away by now since having all the EDC wires removed....
Thoughts?
HOWEVER......... its still spewing tons of micro bubbles especially out the longest line, the right rear inside and outside of the caliper. it would only make sense that there is a leak somewhere with i checked and there isn't, i cleaned everything to let sit overnight just incase but the other more concerning possibility is the abs pump......
I dont know what to do now at this point, I've got absolutely no brake pedal at this point and no electronics.... also it is displaying suspension warning still after 10+ ignition cycles I thought it would have gone away by now since having all the EDC wires removed....
Thoughts?