madmanmart
Member
- Messages
- 377
Attached is a picture showing the fork and original wishbone on my 3200. As you can see from the photo the gap between wishbone and fork bracket is very tight so if the pattern wishbones are a lot thicker and you have brackets which has the strengthening plate welded in with a gap then the pattern wishbones might not fit without modification. It will as others have suggested depend on each individual case, mine is an early 2000 reg car model 1023 it would be nice to see if Maserati modified the fork bracket on later cars, perhaps someone with a 2001 car could take a photo.
Rex BView attachment 33250View attachment 33250
Here you go, 02 plate car.