Zep

Zep

Moderator
Joined
Last seen
Messages
9,904
Reaction score
7,763
Points
113

Profile posts Latest activity Postings About

  • V
    Hi Zep,

    I have a 2011 granturismo 4.7s and would like to upgrade to your big brake kit. Please can you let me know availability for both front & rear and how to order?

    Many thanks

    Richard
    S
    Hi Zep, it was recommended that I reach out to you on my 2014 Granturismo Sport, 35000 miles and it already had some of your discs fitted on front. A couple of months ago the car developed brake judder at high speed, diagnosed to rear (OEM) so changed. 1500 miles on problem is returning. The car has had 2 sets of rears (now 3) fitted since 2020, is there an issue that could cause this degradation to happen?
    J
    Hello Zep,

    I saw your post about disc bolt replacements, I’m looking for some new bolts to replace some corroded ones on my MC Stradale.

    Is this something you could help with?

    Thanks
    Zep
    Zep
    Hi - yes I can. I will send you a message.
    • Like
    Reactions: J7777
    A
    Bonjour Zep,
    Ravi d'être sur ce forum
    Je dispose d'un coupé 4200 gt cambiocorsa de 2003 et je recherche la dimension originale des disques de frein avant voiture je désire les faire sur mesure mais je n'arrive pas à trouver toutes les dimensions.
    Pouvez-vous m'aider ?
    Merci d'avance
    J
    Hiya Zep - similar with Neilc below, I also have a 4.7 2014 Granturismo Sport and looking for brakes and pads. Are there actually aftermarket ones I can use that are the same size and fit? I'm also interested in upgrading them to the big brake system some facebook members have recommended, and told to reach out to you. Could you let me know cost of this and where I can get it done? Thanks, James.
    Zep
    Zep
    Hi James. I’ll drop you a PM this evening.
    N
    Hi Zep, I have a 2014 4.7 Sport and am about to order parts for some upgrades and want to upgrade the front and rear brakes, braided hoses and fluid and I hear you're the man to come to ? I am also planning spacers and H&R springs to be fitted when I get the car serviced. Can you help me with an idea of cost and availability please ? Many thanks, Neil
    Zep
    Zep
    Yes I am. I will drop you a PM this evening with the details.
    • Like
    Reactions: Neilc
    N
    Neilc
    Thanks. Not sure if I can get personal messages as a new member? Still trying to navigate the forum..
    Zep
    Zep
    Sorry, things went west last night. Don’t worry about messages, I’ll turn them on for you.
    • Like
    Reactions: Neilc
    S
    Hi Zep,

    I’ve seen your posting on another thread about knowing how to bypass the navtrak module, I was wondering if you could help with the removal of mine from my Levante?

    Thanks,
    Shaz
    Zep
    Zep
    Hi Shaz. I can’t help with a Levante. If you call Navtrac, they will come out and remove it for you.
    JamesDF
    JamesDF
    I have installed GPS trackers by contract in the past. Most tracking systems are a two wire installation (red/black) Majority of SOP requires wires to be splice into the OBD feed close to the plug. It's the easiest and fastest way to tag a ground and 12 V constant. If you attempt a DIY removal. Please cut one wire at a time. First follow the wires to confirm they end at the GPS module.
    M
    Hi Zep, can you tell me details about your big brake upgrade kit for maserati. How much is it, seperated into front and rear, i probably only want the front.
    Does it fit a granturismo 4.7s 2010 model?
    Where are you based and can any good mechanic fit the kit?

    Thanks in advance

    Mark
    J
    hello Zep, I understand you have an adapter and alternate oil pressure sender for the 4200 ? I have an 02 with a flickering gauge

    thanks

    chris
    kentucky, USA
    A
    Hi zep, im roberto from italy, i have common problem in forum, low pressure oil in traffic, in reverse back, and in neutral, but when push on rpm tje pressure is ok. A friend wrote me about heatsheild, but i found it, where s it, and where found it. Grazie a presto
    masercc
    Hi Zep, in a thread from 2019 you said, "I have an adapter and sender kits, plus the tools to fit which cost less than the OEM part, PM me if you want one." Would you be willing to send to me in the USA? What would the kits cost, plus shipping? Thank you!
    masercc
    masercc
    To clarify, I'm referring to an oil pressure sender and adapter for a 2004 Coupe Cambiocorsa. Thanks again
    M
    Zep,
    I have a 2004 Spyder CC.
    I note from this forum that you have devised a replacement using an adaptor and a some form of "standard" or more common pressure sensor. Can you provide details on how i can obtain one? Thanks. How do I get these from you?
    M
    Hi Zep, I've got a QP Evoluzione V8 and need an oil pressure sensor replacement. (Part Number 183452) I note from this forum that you have devised a replacement using an adaptor and a some form of "standard" or more common pressure sensor.

    I would be interested in the details of where I might source the parts?

    Thanks in anticipation,

    Myke (UK)
    Zep
    Zep
    I’m really sorry, I have only just seen this.

    My parts are specific to the F136 engine, however I know David Askew has a similar product for the earlier engines. Have you tried him?
    TomSulen
    TomSulen
    I’m a new member with 2 Ghiblis and a GT C Sport. I left BMW and never looked back. I love the Mas. I have 2 great dealers that I use. Mas of Palm Beach and Mas of New England (Boch). Both are great . I’ve considered trading the GT for a California T but there really no reason to do it. Any thoughts on GT vs T?
    safrane
    Hi Zep. Good luck with the sale...bargain at that peice.
    could tou PM me with how much the bushes set you back fitted.
    Thanks
  • Loading…
  • Loading…
  • Loading…
Top