Thanks George, can't get the link to work though
Search the forum for the thread 3200 HAS NO POWER
Pull the instruments and check if the engine light has been disconnected.
It was working before Christmas as it came on due to the throttle pot failing.
Is there a stored code for failed CEL?
Sorry, I'll get me coat.
C
Well that’s a new one then, only on a Maserati!
I’ve had a couple of those contactless pots and never had any luck with them.
Well that’s a new one then, only on a Maserati!
I’ve had a couple of those contactless pots and never had any luck with them.
Really? What exact problems did you have sir? I have tried my best to resolve any problems that people have with the sensors, and generally it seems to be a good fix, there are something like 160 of them out there now and i dont spend my life dealing with issues, but if people dont tell me i cant fix the issues.
Its in limp mode, no lights on the dash?
Battery reset first....disconnect battery (don't close the boot and drop the drivers window) leave for an hour, reconnect and see what happens.
Yep. Dash out time again.
Not entirely sure what has caused the throttle pedal error or even the if that has caused the lack of power, especially as the throttle would fully open. Haven’t been for a drive since I cleared the error.
Do these have a limp mode they go into where there is reduced power?
First conect the diagnostic tool on the car and see the wrongs
i would reset the code and if it happens again and its the pedal sensor do a quick recalibraiton routine?
So the CEL bulb was faulty? And the fault is now cleared and car drive smoothly.