Wiper arms

[SteveM]

Returning to original post question regarding whether there is a need to replace arms, this for me was resolved itself last year when I discovered neither Maserati or Eurospares could get any new replacement arms for the 3200 and apparently the 4200 arms are different so I was faced with replacing one wiper with worn splines with second hand arm and taking a bit more care when removing the arms subsequently. It would be good to establish whether there is an equivalent part for future reference.

 

[CatmanV2]

My arms have been removed 3 times so far in a month. No issues to report as yet

C

 

[saintetienne]

My arms have been removed 3 times so far in a month. No issues to report as yet

C

Same as that -however I do use a "puller" to take wiper arms off though - had a bad experience some years back !

 

[CatmanV2]

Same as that -however I do use a "puller" to take wiper arms off though - had a bad experience some years back !

I *have* to use a puller to get mine off. In fact on boht occasions I've removed them I needed to put a 32mm open ended spanner on the hand-wheel of the puller to get them to let go!

C

 

[adam01]

Its the 24p one...I have had a few. They stop the blade from shaking as it goes across the screen

re post #14 ^

Nope - that part is for the swivel arm as per attached pics.


Clip is p/n 383300299