Oil pressure warning light and guage 4200cc

[Kookaburra]

Thanks guys, I'm reasonably capable but don't have any of the special tools that have been mentioned - is there something I can readily buy on the DIY market or would it be better to take my 4200CC to an indy specialist and let them charge me? Any thoughts welcomed, thanks...

 

[Zep]

You could buy one of these

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/181771373422

Or you can do what I did, buy an old 3/8†socket and a 24mm spanner. Cut the end off the spanner and get a local welder to join them together. It'll save you about £20.

Thanks guys, I'm reasonably capable but don't have any of the special tools that have been mentioned - is there something I can readily buy on the DIY market or would it be better to take my 4200CC to an indy specialist and let them charge me? Any thoughts welcomed, thanks...

 

[Kookaburra]

You could buy one of these

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/181771373422

Or you can do what I did, buy an old 3/8” socket and a 24mm spanner. Cut the end off the spanner and get a local welder to join them together. It’ll save you about £20.

Cheers Zep, I've got a local workshop guy just up the road so that sounds like a viable option...

 

[Zep]

Zip, if you have any spare adaptors could I buy one please? I'll fit it the next time my sender goes, and it will!

I think you are having the last one of the first batch. I'll pop it in your glovebox as I understand you are getting your car back shortly.