"GS Style" alloys for 4200

[blue520]

What do you think guys? will fit 4200 .
look good value
http://cgi.ebay.co.uk/18-JAGUAR-BBS...s_tyres_Trims_Car_Rims_ET&hash=item5adfa14848

 

[conaero]

Yes, I thing for an aftermarket wheel, they look ok. Is the ofset ok, cant remember if its 108?

 

[dickygrace]

They're a very good match design-wise. Great find if they fit(I've got no idea). They're 18"s whereas a GS is 19"s

 

[BennyD]

Unfortunately, they all look to be 8J whereas the rears need to be wider than the frount. Perhaps if 2 interested parties got together they could get two sets, one each of the appropriate size and then and then swap 2 big ones for 2 small ones and voila, happy days!

 

[ENZ525]

Agree that the PCD looks right (5 x 108) need to check the offset for both front and rear...
make sure they don't stick out too far or scrape the calliper.

 

[Woody]

Agree that the PCD looks right (5 x 108) need to check the offset for both front and rear...
make sure they don't stick out too far or scrape the calliper.

Using the web (not my own knowledge) the bore and offset are different - GS being 67.1 and 55 repsectively, and the X type being 63.5 and 52.5.

Not sure if the front/rear offest are different on the GS.

 

[ENZ525]

Using the web (not my own knowledge) the bore and offset are different - GS being 67.1 and 55 repsectively, and the X type being 63.5 and 52.5.

Not sure if the front/rear offest are different on the GS.

Then these will not fit without being machined!