JayOne
New Member
- Messages
- 92
This booked in for full correction along with change of wheel colour and the rear diffuser also being changed to a different colour
Vehicle after the wash stages and before the subtle changes to wheels and diffuser
Wheels before were a flat silver
Wheels after - done in a nice Black Chrome with the insides black. These were protected with 3 coats of Zaino Z2 and tyres dressed with Zaino Z16
Arches and suspension throughly cleaned using AG Powermax 3
After
Wheel hubs recieved a bit of TLC also.
They were sanded back, primered and painted with a few coats
Rear diffuser was dropped and taken to bodyshop so they could spray it to clients choosen colour - light antracite. Whilst this was off this allowed me to polish up the exhausts, this was done using Briliant Metal polishes. They were then sealed with Blackfire All Metal Sealant
Before -
After
With newly painted diffuser
Correction was carried out using Menz 3.02 on a 3m polishing pad
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
oNCE correction was complete paintwork was refined using Megs 205.
SV cleaner fluid was applied/removed by hand and paintwork was given a coat of Swissvax Divine with a final wipedown with SV quickfinish a couple hours later
A few afters - some were taken taken on a nice sunny day whilst others taken on a overcast day
Thanks for looking
Vehicle after the wash stages and before the subtle changes to wheels and diffuser
Wheels before were a flat silver
Wheels after - done in a nice Black Chrome with the insides black. These were protected with 3 coats of Zaino Z2 and tyres dressed with Zaino Z16
Arches and suspension throughly cleaned using AG Powermax 3
After
Wheel hubs recieved a bit of TLC also.
They were sanded back, primered and painted with a few coats
Rear diffuser was dropped and taken to bodyshop so they could spray it to clients choosen colour - light antracite. Whilst this was off this allowed me to polish up the exhausts, this was done using Briliant Metal polishes. They were then sealed with Blackfire All Metal Sealant
Before -
After
With newly painted diffuser
Correction was carried out using Menz 3.02 on a 3m polishing pad
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
BEFORE
AFTER
oNCE correction was complete paintwork was refined using Megs 205.
SV cleaner fluid was applied/removed by hand and paintwork was given a coat of Swissvax Divine with a final wipedown with SV quickfinish a couple hours later
A few afters - some were taken taken on a nice sunny day whilst others taken on a overcast day
Thanks for looking
Last edited:
