theoldsmithy
Junior Member
- Messages
- 40
I removed the headliner today to go & be re-trimmed. In the midst of wrestling it out unfortunately the rear view mirror got in the way & came off. I've been through the car but can't see the trim piece anywhere that the drawing says should have been on it and to be honest I can't actually recall if it was, I didn't pay that much attention of course. So I have as shown below but can't really work out what goes where. The trapeziodal bit in the top of the mirror slides out, it is held in by a central depression underneath which a sprung loaded ball sits in. I assume it should be on the screen bracket?
This is left on the screen. What am I missing, mentally or phsically? It's wider that what's left on the mirror, but should the trapezoidal bit fit here? Is this what holds the trim piece on?
Looking at pictures of the trim piece (67036000) https://www.ferrariparts.co.uk/part/maserati/67036000?id=164572 it's a reasonable size & I would have thought I'd see it under the seats or in the footwells, but nothing.
Anyway, if anyone's had these bits off before I'd appreciate some guidance.
This is left on the screen. What am I missing, mentally or phsically? It's wider that what's left on the mirror, but should the trapezoidal bit fit here? Is this what holds the trim piece on?
Looking at pictures of the trim piece (67036000) https://www.ferrariparts.co.uk/part/maserati/67036000?id=164572 it's a reasonable size & I would have thought I'd see it under the seats or in the footwells, but nothing.
Anyway, if anyone's had these bits off before I'd appreciate some guidance.