3200 Knock Sensor

[alfatwo]

Does anyone have a part number for the knock sensors on a 2001 3200GT...

Thanks Dave

 

[conaero]

Not to hand check Eurospares.co.uk and post it here of you would.

 

[Rex B]

Hi its part no 585089700 £47.64 plus vat to order.

Rex B

 

[alfatwo]

Is there any where else you can buy them besides Europarts..
there most likely the same as fitted to Fiat or Alfa and cost half the price

Rex is that a Bosch part number

Dave

 

[chippiepilot]

try David Askew, he deals with new parts as well as used or Eurocarparts

 

[Rex B]

Dave

That's the part no from the eurospares website. If you need one give Bill McGraths a ring 001438 832161 they do keep a good stock of parts.

Rex B

 

[chippiepilot]

Forgot about McGraths, another good place to try

 

[conaero]

Is there any where else you can buy them besides Europarts..
there most likely the same as fitted to Fiat or Alfa and cost half the price

Rex is that a Bosch part number

Dave

Speak to Alan at Dick Lovetts, he gives out a discount to SM members, just make sure you mention the forum and me (Matt)

Alan always comes under ES prices and seems to post them for free:

Alan Clark alan.clark@dicklovett.co.uk

 

[alfatwo]

Thanks Matt I'll give him a call on Monday,in the meantime I'll do some research on part numbers...

Dave

 

[RSM Masser]

Speak to Alan at Dick Lovetts, he gives out a discount to SM members, just make sure you mention the forum and me (Matt)

Alan always comes under ES prices and seems to post them for free:

Alan Clark alan.clark@dicklovett.co.uk

Wish I had remembered that before I bought mine.

 

[alfatwo]

How much did pay if you don't mind me asking...Ive done a qiuck search, the same part number comes up as £35

 

[RSM Masser]

How much did pay if you don't mind me asking...Ive done a qiuck search, the same part number comes up as £35

From Eurospares - they where about that, each - you need two - plus all the other gaskets and bits and bobs, then I replaced the 4 x 32mm diameter water hoses. On the second time I refitted the inlet manifold, due to a water leak, I replaced all the other hoses as well - two heater hoses. The very short hose (4 inches long) was £72 from Euro scares! (the two long heater hoses £12 each) - it was not until close inspection yesterday that I realised one end is a smaller diameter so plan A to cut a new pipe from the middle of an long old one failed.
Plan B was self almagamating tape and wider jubilee clips