3200 GT with annoying sticky heater controls? Any advice please?!

davy83

Member
Messages
2,809
There are quite a few threads here on sticky buttons, its a pretty common problem. There are a few how to entries showing how people have cleaned then up. Do a bit of searching ?
 

Oneball

Member
Messages
11,072
I did it on mine. The 3200 is easier than the later cars as the knobs and switches are black plastic under the goo.

You’ll need to remove them and clean them with a solvent then you can use a matt clear coat to protect.
 

Rex B

Member
Messages
657
When you pull the switch control buttons off to do them make sure you don’t loose the little springs and plastic thingy
Rex B