3200/4200 Rear Suspention Toe-in Link Bearings

[swmillar]

Dave, how much are the spacers? Need 4 to do the rear?

 

[Gary687]

Hi Dave

I think the Oz boys have topped out now at 15 sets of everything so let me know what the next stage is and I'll arrange accordingly.

Cheers

Gary

 

[Aredes]

Would it be possible to post here the SKF part number? I live in Portugal and would like to get my hands on these bearings for my car. The one on the right hand side is worn...

 

[alfatwo]

Ive been away for the last few days,It seems its gone manic,not to worry though... Im still waiting on the first batch of spacers
Ive kept a list of everyone PM's, I'll let you know when I get more info

Cheers,Dave

 

[Gary687]

Awesome thanks Dave!

Cheers

Gary

 

[rossyl]

Thanks Dave - I've PM'd you as well.

 

[Alan P]

Hi Dave,
I need the bearing and spacers for the RHS on my 2003 Coupe, do you have enough room in your order, by any chance?
Alan

 

[alfatwo]

Ok guys here we go, the spacers have arrived at last, the not so good news is they've only made 14 pieces and not in stainless as I instructed,a complete bulls up!..(I must say though they do look superb,all done on the lathe as one off's)
They can make more if anyones interested...

As it stands I have three spare cars sets available at the moment, bearings plus spacers or whatever

Getting the bearings from SKF is around four days from Germany is fairly easy at the moment,but you never know how many they have left in stock!
Maybe you guys in Aus with your large order could get the spacers made locally,I could just ship you out the bearings..

So back to basics,Its £12 each for the bearing,£5 each for the spacer and I'll post them out anywhere in the UK for a Fiver!

Paypal's ok

Sorry If its got a little complicated...give me a shout if Iv'e missed anything

Cheers,Dave

 

[adam01]

^^^^^^^

Dave

Re OZ suggestion for spacers, will let Gary drive this but sounds feasible.

Would suggest 1 set is required as a model for the balance, also any special SS specification?

 

[Gary687]

Hi Dave

Thanks for the update. As it stands here in Oz we are after 15 of everything so maybe as adam01 has suggested, if we could grab one set of the spacers then we could look at getting them made up locally and just grab the 15 sets of bearings from your next order?

As for paying for the bearings, one set of spacers + your postage, let me know the grand total and I'll pay you via PayPal and I'll sort the rest out once they arrive here.

Hope that's OK?

Cheers

Gary

 

[alfatwo]

Ok Gary to get things started,you want 30 bearings,15 car sets is this correct...I'll throw in a spacer as a pattern FOC
I'll try and work out the weight for shipping to Aus in the meantime...let me know over the weekend

I haven't forgotten the rest of you guys who have PM'd me over the last few weeks for the same stuff

Cheers,Dave

 

[Gary687]

Hi Dave

Yes please, 15 car sets so 30 in total would be awesome thanks. The spacer would be very useful too so thanks once again for that. I've already started speaking with someone on our Forum who might be able to help with that so will get that to them as and when it arrives.

Cheers

Gary

 

[Gary687]

Hi Dave (again!)

Re the spacers, is it possible to get some form of pic with measurements and also the spec of SS needed/required so we can start the ball rolling here in anticipation of getting our hands on one please?

If not, no dramas, we'll wait...

Cheers

G

 

[alfatwo]

Heres a pic Gary,not very good though and for anyone who wasen't sure what part we were talking about

Dave

 

[Gary687]

Hi Dave

Thanks a bunch for that. Excuse my ignorance but are the spacers we're talking about the 2 smaller rings on the right of the pic??

Cheers

G

 

[LORENZ-GS]

DOes anyone have the bearing number that was used here,,,thanks