ghibli diesel non start ( complicated )

bembo449

New Member
Messages
21
not a chance of that pal , its not actually been driven since unfortunately , its now all coded up , stil refused to start until they updated the software and its still only running on 4 pots , i get it back on wednesday morning , will carry out a compression test on cylinders 1 & 2 , im going to be very upset if it shows a lack of compression as i had the car running smoothly before , otherwise i wouldnt have carried on with the recommisioning
 

CJ Romeo

Member
Messages
130
not a chance of that pal , its not actually been driven since unfortunately , its now all coded up , stil refused to start until they updated the software and its still only running on 4 pots , i get it back on wednesday morning , will carry out a compression test on cylinders 1 & 2 , im going to be very upset if it shows a lack of compression as i had the car running smoothly before , otherwise i wouldnt have carried on with the recommisioning
It could just be coked up and will clear after a few heat cycles
 

bembo449

New Member
Messages
21
another update , using node lights , there is no power getting to injectors 1 thru 3 , 4,5,6 all flash strongly when the car is running but nothing on the first three cylinders , i guess the next step is to test the wiring harness
 

bembo449

New Member
Messages
21
tested wiring harness , all seems to be in order , did continuity and power probe to test it , running out of ideas . . . . .
 

bembo449

New Member
Messages
21
ive managed to source a pin out diagram for my car , is the method i used above the best / most effective of testing the harness ??
 
Messages
403
Hope you get it sorted chap!

I'm just shocked that a Ghibli (albeit a III) diesel is 'a thing'. I mean, diesel. Maserati.