Wheel Spacers.

[Emtee]

I'm going to add these to my 4200 and am thinking 25mm at the back and 15mm at the front. Now FD / PI have both but they aren't cheep.

Having had a good look around Hill Engineering they're offering what looks like the same thing and it reminded me that Loz and Enzo substituted a GS/4200? wheel onto Enzos 550 to get it home and so am I right to think that certain Ferrari spacers will fit Maserati?

If someone could confirm one way or anther, if not I'll give them a ring.

Thanks, Miles.

 

[ENZ525]

I'm going to add these to my 4200 and am thinking 25mm at the back and 15mm at the front. Now FD / PI have both but they aren't cheep.

Having had a good look around Hill Engineering they're offering what looks like the same thing and it reminded me that Loz and Enzo substituted a GS/4200? wheel onto Enzos 550 to get it home and so am I right to think that certain Ferrari spacers will fit Maserati?

If someone could confirm one way or anther, if not I'll give them a ring.

Thanks, Miles.

Hi Miles...hope you had a nice break, good to have you back...
Firstly, Hill Engineering have an excellent reputation for quality parts from what I have heard recently...
The PCD on the 550 is the same as the Maserati 4200 & GS (5x108) so that size will fit,
But, If I recall correctly, I had to take the spacer off when using Loz's wheel because of the bolt length,
so I think you may also need appropriate (shorter) bolts.
I would be happy for you to try out the spacer I have to see if it fits / looks right etc..if you wanted to try that,
Regards,
Enzo.

 

[Emtee]

Hi Miles...hope you had a nice break, good to have you back...
Firstly, Hill Engineering have an excellent reputation for quality parts from what I have heard recently...
The PCD on the 550 is the same as the Maserati 4200 & GS (5x108) so that size will fit,
But, If I recall correctly, I had to take the spacer off when using Loz's wheel because of the bolt length,
so I think you may also need appropriate (shorter) bolts.
I would be happy for you to try out the spacer I have to see if it fits / looks right etc..if you wanted to try that,
Regards,
Enzo.

Hi Enzo, yes had a lovely break than you. Thank you for your kind offer also. If you can live without it for a couple of days that would be very helpful. I'll cover the postage cost of course. I'll PM you my address. Regards, Miles.

 

[rossyl]

Hi Guys

From reading around I can see that MAF recently had spacers done on his Gransport. It looks like Miles had spacers on his 4200.

Miles I don't suppose you have any photos of your 4200 with spacers do you?

Thanks

 

[Andyk]

All I will say is that it looked brilliant on spacers........Say it a few times and suited the car...

 

[rossyl]

Thanks Andy.

Miles - you got any pics please?

 

[Felonious Crud]

There are some on here of MAF's before and after, Ross. I remember him posting them. Maybe run a search for "spacers". May take some trawling, though.

edit: here you go: http://www.sportsmaserati.com/showt...less-wheel-bolts-and-aluminium-spacers/page2?

 

[rossyl]

Thanks Adam - I had seen MAF's but his is a GS, I was hoping for seeing what they looked like on a 4200.