Wheel refurbished finally... Wooo!

[BDM]

Because everyone loves a picture thread Big thanks to @Zep for measuring the centre caps for me and big thanks to @Chimaera500 for the inspiration

 

[Gazcw]

Because everyone loves a picture thread Big thanks to @Zep for measuring the centre caps for me.

View attachment 97179

Very nice. What colour? Calipers next.....

 

[BDM]

Went a shade of shadow chrome which it tweaked with the guy. Now toying with the idea of H&R springs as i need a new set of springs. Just wondering if it will be too low and scrape. Might need to adjust the front number plate holder?!

 

[Gazcw]

Went a shade of shadow chrome which it tweaked with the guy. Now toying with the idea of H&R springs as i need a new set of springs. Just wondering if it will be too low and scrape. Might need to adjust the front number plate holder?!

I dropped my qp 20mm all round and the front was too much. I would do the rears first and see what it is like.

 

[BDM]

I dropped my qp 20mm all round and the front was too much. I would do the rears first and see what it is like.

Really... interesting... So i see the H&R kit does Lowered front axle [mm] 15 mm, Lowered Rear Axle 35 mm. Just wondering if this is going to be absolute carnage lol

 

[Oneball]

I think that’s perfect. I wouldn’t be lowering it any.

 

[Ewan]

Try some spacers first. Strangely they give the effect of the wheel filling the arch, but without lowering the car. Or maybe lower it by just 10mm, which from memory is the difference between a Strad and the other versions of the GT.

BTW - the new wheels look fab!

 

[BDM]

Try some spacers first. Strangely they give the effect of the wheel filling the arch, but without lowering the car. Or maybe lower it by just 10mm, which from memory is the difference between a Strad and the other versions of the GT.

BTW - the new wheels look fab!

Already have H&R spacers. Who does 10mm springs front and back? Not seen them? If not will just need to buy factory springs i guess. Cheers

 

[Sam McGoo]

Already have H&R spacers. Who does 10mm springs front and back? Not seen them? If not will just need to buy factory springs i guess. Cheers

You can get the factory supplied 'MC handling pack' which are the strad springs. They are 10mm lower than a standard Granturismo.

 

[BDM]

You can get the factory supplied 'MC handling pack' which are the strad springs. They are 10mm lower than a standard Granturismo.

Thanks Sam, would i need to get the whole MC Pack or could i just get the springs and they would work with my skyhook original set up? Cheers

 

[Gazcw]

Thanks Sam, would i need to get the whole MC Pack or could i just get the springs and they would work with my skyhook original set up? Cheers

Springs are springs. 10mm all round will still leave you with a$$ up appearance. Depends why you want to lower it I guess. Looks or handling?

 

[tasnam]

What length/size is the Italian flag under the Trident?