QP Door issue - Passenger inside handle

gjwilson

Junior Member
Messages
146
Well after reading a little on this it seems to be rather common.
The Mrs was in the passenger seat and went to open the door to no avail, just a snapping noise.

Anyway, got the door card off to see its a little bit of plastic that's broken that channels the cable for the latch.
From my understanding this only comes as a complete unit.

Now on the phone to Maserati and they gave me part number 68001900
http://www.eurospares.co.uk/searchResult.asp?find=+&S=68001900

Another dealer gave me
http://www.eurospares.co.uk/searchResult_one.asp?S=980139459&TM=3&TMo=636&TA=2&TB=36262

Now these vary a lot in price and I have been told that if its ordered and its the wrong part it cannot be returned, great!!
Anyone on here replace the parts before?
I have attached pictures below.
Any ideas the part I need?

IMAG0209.jpg

IMAG0211.jpg

IMAG0212.jpg
 

Gixerboy

New Member
Messages
549
I had the same issue, managed to repair the cable guide with epoxy resin, using cable ties to pull it back to shape,
may be worth a try?
Re part number Eurospares with car chassis number would be able to confirm correct part, would get my vote.

Cheers
 

gjwilson

Junior Member
Messages
146
Nice one I will give that a go today.
Had my doubts as to whether this would hold, but if its worked for you then its worth a shot. :)

Thanks
 

gjwilson

Junior Member
Messages
146
Many thanks for the advice!
You have saved me a fortune :)
All done and working a treat.
Used the Super Steel Epoxy resin and works wonders

Thanks again, it is appreciated
 

Gixerboy

New Member
Messages
549
Many thanks for the advice!
You have saved me a fortune :)
All done and working a treat.
Used the Super Steel Epoxy resin and works wonders

Thanks again, it is appreciated

Ur welcome The Power of the forum is in sharing information & experiences.

Cheers