Maserati 3200 Key - Black Rubber Button

D

dem maser

Moderator
Messages
33,140
No dont need that......
If you see the plastic thing that goes around the wipers let me know....
 
Parisien

Parisien

Member
Messages
34,902
Check the part no on Eurospares site....or contact seller direct Alan at D Lovetts....contact details on the advert...but I believe what you say is correct!


P
 
L

LeeH

Junior Member
Messages
476
I have bought one too. Just need to work out how to fit it.

Do you split the two sides of the key apart?
 
TheBeagler

TheBeagler

New Member
Messages
58
LeeH said:
I have bought one too. Just need to work out how to fit it.

Do you split the two sides of the key apart?
Click to expand...
Don't know...I think so...I think there is something in the owner's manual for changing the battery so it should be the same for the rubber button...my current button is flushed to the side of the key casing. I'm assuming that it's meant to stick out a bit hence I ordered one.
 
Parisien

Parisien

Member
Messages
34,902
Am sure one of the 3200 guys will pass by, but for the 4200 fob, yes just prise apart and all will be evident.

P
 
Parisien

Parisien

Member
Messages
34,902
Last year we had a group buy for the 4200 rubber bits...about 10/12 guys got them.......and saved a few bob...:)


P
 
L

LeeH

Junior Member
Messages
476
TheBeagler said:
Don't know...I think so...I think there is something in the owner's manual for changing the battery so it should be the same for the rubber button...my current button is flushed to the side of the key casing. I'm assuming that it's meant to stick out a bit hence I ordered one.
Click to expand...
Mine is also heading south inside the keys casing. If i dont replace it now i will have nothing to press ;-)
 
L

LeeH

Junior Member
Messages
476
All done and fitted.

Took about 30 seconds, easiest fix on a car ever...

May have to get a spare one as i am sure it will go again at some point...
 
TheBeagler

TheBeagler

New Member
Messages
58
LeeH said:
All done and fitted.

Took about 30 seconds, easiest fix on a car ever...

May have to get a spare one as i am sure it will go again at some point...
Click to expand...
Did you find a loose bit of plastic in the fob? I left it out thinking it wasn't important but the car wouldn't start without it!!!
 
L

LeeH

Junior Member
Messages
476
TheBeagler said:
Did you find a loose bit of plastic in the fob? I left it out thinking it wasn't important but the car wouldn't start without it!!!
Click to expand...
No loose bits Of plastic in mine.

Just prided the edge open and swapped it over and clicked key back together..
 
M

Martijn Smeets

Junior Member
Messages
41
Hi,

I know it's an old thread but I reengineered a "3200 GT black button rubber" on my 3D printer from FLEX 98A material.
It's not as soft as the original and you need to press a bit harder but at least it's not "trigger happy".
Just let me know if anyone is interested in the STL file for printing or I might be able to ship some for a reasonable price.


58213 58214

58219

P.s.: The final print quality will be a lot better because I had high moisture level in the filament which makes it bubbly.
 
Last edited:
M

MRichards

Junior Member
Messages
101
Got mine on eBay from a guy in Slovenia who specialises in these buttons,also very cheap. The button was OEM as well.
 
You must log in or register to reply here.