Headlight re fitting

jasst

jasst

Member
Messages
2,316
Is there an 'easy' way of re installing the headlights? I'm thinking more about the seals, as had to push them out of the way to remove them, but don't think you would be able to fit them afterwards? Any tips much appreciated.
 
Lozzer

Lozzer

Member
Messages
2,285
Just done mine and the seals were installed on the light? The lights need to be rotated slightly and put in at an angle from the front or are you talking about something different?
 
jasst

jasst

Member
Messages
2,316
That was what i was wondering, there are two tabs on the seals at the back, do you also stick the seals to the lights first? one was stuck between the two tabs, the other just a bit on the bottom, as i had to pull the front edge of the seals out to get the lights out, I would have thought that they will have to be out to get them back in?
 
Lozzer

Lozzer

Member
Messages
2,285
No mate, it all goes in assembled together, unless it's a different set up on a 4200? Not sure which car you have, ive been doing my 3200
 
Lozzer

Lozzer

Member
Messages
2,285
Hi , don't know if this helps but I'm on with the passenger side today.
Airbox out of the way and all fixings out
64837

Taking headlight out

Putting fresh headlight in

HTH
 
You must log in or register to reply here.