Front number plate options

Mu22y

New Member
Messages
4
Hi All,

My front number plate needed to be replaced and in the process I’ve removed the god awful metal bracket it sat on previously.
What have others done for a front number plate?
The plate is 5 digits so fits a smaller width.
All options would be appreciated as at the moment it’s not got one.
For info…it’s an MC Stradale.
Thanks all
 
Last edited:

Scaf

Member
Messages
6,703
Mine is mounted in the same place but it have gone for a 3 x 12 plate. Technically none compliant but it’s been on for 3+ years and had similar on my MC for 3 years. No issue and ANPR car parks are able to read it.

Fitted with 3M tape
 

Attachments

  • 6f856f93-a9c1-4f58-a727-62c91810177a.jpeg
    6f856f93-a9c1-4f58-a727-62c91810177a.jpeg
    249.2 KB · Views: 40
Last edited:

Gazcw

Member
Messages
7,828
Mine is mounted in the same place but it have gone for a 3 x 12 plate. Technically none compliant but it’s been on for 3+ years and had similar on my MC for 3 years. No issue and INPR car parks are able to read it.
I decided to go smaller than legal but not draw too much attention.
 

modelT

Junior Member
Messages
79
I did the impulsive thing and got a five digit plate from the DVLA. Then I ordered Hex plates and cut them down a bit to match a bit to the grill. Still legal as 11mm border and BSAU thing on there.
I used screws and Sikaflex to hold the front plate on and it is very firm. Just hope I never need to take it off…