clutches

Parisien

Moderator
Messages
34,927
Good find CP.....wondering how good their claims are.......good price if true plus includes release bearing



P
 

chippiepilot

Junior Member
Messages
437
yes I wonder too, I suspect they should be good - handmade and made to order gives the impression its something special
 

Emtee

New Member
Messages
8,446
I'd be very interested to hear your feedback Adam. As far as I'm aware, the 360 clutch is the same. The fly wheel and release bearing certainly are. There's a certain amount of re-manufacturing mentioned. I'd be concerned if they're re-using the diaphragm spring, as this is a known weakness.
 

lozcb

Member
Messages
12,586
As with most things in the specialist motor trade ,ive found several places that can and do offer higher wear and performace clutches for both the 4200 and 3200 , and a lot lot cheaper around 30% of the oem cost , where the stumbling block kicks in is the labour charge to give them a try to verify their claims and product , at £600 a pop for labour ive found it hard to actually bite the bullet and try one out



regards loz
 

Emtee

New Member
Messages
8,446
Miles....just to double check the 3200/4200 clutches are different?


P

Post amended thanks to Loz's correction below.

4200 / GS variants the same when CC. Different when manual and both different to the 3200's
 
Last edited:

adam01

Member
Messages
1,079
have requested info from these guys

http://www.cnsracing.com/

if anything relevant comes back, will post up

Not much of a response

You can send us your used clutch kit and we will rebuild it with new components and full warranty. Otherwise we can purchase a new OEM clutch kit and modify the disk and internal parts for higher performance. Please let us know how you would like to proceed.


Thank you,

Mark
CNSracing.com
 

dem maser

Moderator
Messages
34,277
I went auto because of what i heard reg the clutch on the 3200

Happy to see they are now becoming an easier fix....