montravia
Member
- Messages
- 1,624
Thanks,
just blow dried the motor and well, but you're right the loom will be wet.
Just ordered the silica bags.
Not the battery. CTEC is already on phase 4 after charging capacity to 80% during phase 3 after and hour and a half.
Probably water slosh caused the errors.
Another for the snag list.
Perhaps I'll open and rename the thread to see how many of us encounter this dreadful flaw.
Didn't expect fagging about with a so called supercar dealing with such an obvious design fault, but hey ho!
You drilled yours? Simple 3mm drill through the base, what's underneath? Fuel tank?
Thanks again.
just blow dried the motor and well, but you're right the loom will be wet.
Just ordered the silica bags.
Not the battery. CTEC is already on phase 4 after charging capacity to 80% during phase 3 after and hour and a half.
Probably water slosh caused the errors.
Another for the snag list.
Perhaps I'll open and rename the thread to see how many of us encounter this dreadful flaw.
Didn't expect fagging about with a so called supercar dealing with such an obvious design fault, but hey ho!
You drilled yours? Simple 3mm drill through the base, what's underneath? Fuel tank?
Thanks again.