3200 fog light

[jluis]

Tried searching the forum but no luck. Anyone here tackled taking a fog light out on a 3200?
Went for headlight alignment today and they noted one of the fog lights is loose on a corner so most likely a broken support.
Please don’t tell me the bumper has to come off

 

[Oneball]

Front undertray off and you should be able to reach up and unbolt the indicator/fog.

 

[allandwf]

Front undertray off and you should be able to reach up and unbolt the indicator/fog.

I'll take a look for you, my undertray is off at the moment.

 

[davy83]

its really easy with the bumper off (I know you don't want to hear that) I am sure like oneball said you can get it from below.

 

[allandwf]

Good luck with getting them from underneath! Maybe if you take the radiators out the way, I'd say bumper off.

 

[allandwf]

Good luck with getting them from underneath! Maybe if you take the radiators out the way, I'd say bumper off.

Another couple of pics from other side.

 

[RichTaps]

You can get to the fog light fastener with the bumper on - you need a very long extension and maybe a universal socket joint as the angle is tricky from memory. You need to access from underneath as per @allandwf 's picture above.

I've done this - just requires some patience and the front of the car in the air!

 

[jluis]

Good luck with getting them from underneath! Maybe if you take the radiators out the way, I'd say bumper off.

Looks tricky … guess I have to put it on the elevator and see for myself.