martininkent
Junior Member
- Messages
- 137
so started to prep for tomorow, (engine mounts replace )
also a oil leak to check for
blowby on exhaust pipe joints ,reseal joints and replace clamps its blowing a bit (M4 type stainless marine grade clamps )
drop subframe and treat rust if any with wax if needed,
replace all spark plugs and a engine air oil and filter change, gearbox oil change
so far found the oil leak ,its coming from broken oil filer cap and running down the rocker cover following the head face then runs down the side of the sump and blown back over the gearbox sump,
,(first time i've ever removed it in 3 weeks )
new one on order,
the wiper motor and the bulkhead drain tray was nice and easy to remove, just realy to check on condition and make a bit more room for fitting the plugs but i don't think you really need it,
found n/s main link rod for wipers ball joint shot so ordered a new one
also a oil leak to check for
blowby on exhaust pipe joints ,reseal joints and replace clamps its blowing a bit (M4 type stainless marine grade clamps )
drop subframe and treat rust if any with wax if needed,
replace all spark plugs and a engine air oil and filter change, gearbox oil change
so far found the oil leak ,its coming from broken oil filer cap and running down the rocker cover following the head face then runs down the side of the sump and blown back over the gearbox sump,
,(first time i've ever removed it in 3 weeks )
new one on order,
the wiper motor and the bulkhead drain tray was nice and easy to remove, just realy to check on condition and make a bit more room for fitting the plugs but i don't think you really need it,
found n/s main link rod for wipers ball joint shot so ordered a new one