Search results

Hi All! Have looked through as best i can to see if there is an alternative part for a rear wheel bearing - 3200. Have i missed it, is there one? Thanks in advance

Maserati 3200 Manual MY2000 I wonder if anyone can help! I had been enjoying motoring after going through the car replaced all of the necessary things for it to work faultlessly for well over a year. Last year I did fewer miles – only around 700 – and latterly it suffered a misfire/ASR...

Just got my car back on the road and knowing that the whole suspension has been off and rebuilt I decided to take it to Kwikfit. My daughter had a good experience there and they gave a 4-wheel read out even though she had only the two wheels done. For £130 (free initial check and the package...

I had that impression, just enjoying a brief sense of triumph....

I've recently had trouble with CELs with P0236 coming up - among others. Cured by a good check or the system. Pierburg vavle okay, checked with 12v and clicked away happily, vacuum pipes seemed okay, a good suck and blow helps in the first instance! checked both absolute pressure sensors as...

2-year slumber...................o_O

Many thanks that's really helpful. Mine is a non-runner at the moment, no MOT, but coming back from a 20-year slumber is a painful process, so i will try to get the laptop up and running - probably less of a challenge than the car.....

Hi! Having myriad problems with my 3200 and thought it would be a good idea to get the software working. I have downloaded both Unidiag kwp2000 and Kpw71 (airbag i understand). Neither will run on a windows 10 laptop. Has anyone got the software that will work on Windows 10 please?

I have a slight problem with my year 2000 3200GT. Driver's airbag light is on - my fault! The car is SORNed and needs an MOT, but my local MOT man can't reset the light, so won't give it an MOT. Do i drive to somewhere else and get an MOT where they can reset the light on the basis that i...

Also to report that (subject to an MOT) limited driving around the paddock(!!!) suggests a smooth and not too heavy action, certainly the best gearchange i have experienced with the car. Mike was also very helpful sending me another set of instructions as they hadn't been returned with the car.

Ha! Me again replying to my post! I took out the clutch rubber stop and that gave me a further 22mm of travel on the clutch pedal. Solved the matter apart from quite a long throw. Next time the car is in the garage over the pit i will see if i can fine tune it - or in old fashioned language...

Hi! Has anyone had this problem? Just had the clutch replaced with a Maserati Shed kit, i didn't do it myself, but - long story - as before replacement, difficult to get into gear when cold, but it freed up. Now it won't go into gear at all. I've been through and replaced both master and...

hi! My new matrix arrived today, i immediately measured and checked it against the original. The Nissens part 70016 is almost exactly the same, give or take the odd half mm! Prices vary, bu mine was £37 delivered. From what i saw the SAAB part is a little smaller, but keeping these cars warm...

Many thanks for those who responded. Now that i have the matrix out, i might compare measurements with the Saab all-ally ones see how similar it is and check out the other sites. The final little bolts on the heater unit were very difficult to get to on a 3200 (and there are a few minor...

I'll be onto them on Monday.

Hi All. My first post! Very useful post, but i'm looking at 3200GT heater matrix but not sure how similar the replacement parts are. I noticed a slight leak in the centre console recently after changing the coolant. It seems to be from the edge of the matrix core on the RHD drivers side...