Recent content by Vince Hart

  1. Vince Hart

    Good old ABS

    I’ve been working all this on and off for the last year, still haven’t been able to drive this car since I bought it. So I’ve changed both the ABS sensors. This is due to the transmission going into standby when reaching 2500 revs or also. I can send the ECU off to have it looked at with some...
  2. Vince Hart

    ABS/RCY light 3200

    Anybody got any suggestions I have all the abs lights on. Also the RCY light comes on when I reach 2500 revs. I’ve changed both rear ABS sensors of course for secondhand ones and also a gearbox oil & filter change. I did have the code read before I started working at automatic transmission...
  3. Vince Hart

    Alternative parts, what everyone needs to know...

    Done that, loads on there but can’t find one for the 3200. I know brambo would’ve supplied the same rear brakes for different cars, but what ones?
  4. Vince Hart

    Alternative parts, what everyone needs to know...

    Has any got any idea of an alternative car the rear Brambo brakes of 3200, I am after a bridging pipe? I’ll give Eurospares a ring in the morning, but it’s not listed on the diagrams.
  5. Vince Hart

    Rear ABS sensor 3200

    Thanks all done.
  6. Vince Hart

    Rear ABS sensor 3200

    Has anybody got any tricks to remove the ABS sensor from the rear hub on a 3200, this thing is really well today. I’ve tried soaking it a few times but there is absolutely no movement. The only thing I can think is to drill it but I’m really worried about the copper ring. Also any alternative...
  7. Vince Hart

    Scanner for servicing Granturismo handbrake

    Seriously, thank you for your response, I’m not completely sure I understand I assume there’s a hole on the disc that I can push through and release the cog by turning the screwdriver the correct way I assume is anticlockwise as if I was undoing something, am I right?
  8. Vince Hart

    Scanner for servicing Granturismo handbrake

    Can anyone recommend a scanner, I do have a Foxwell, but it has limited code reading for the Maserati and also no maintenance. I’m trying to replace the hub\wheel sensor on the rear of the car and realised once I got to the disc that the handbrake needed to be computer released. I do have the...
  9. Vince Hart

    Can anyone help me please? 3200 RCY problems

    Thanks for the advice. I’ll do this first.
  10. Vince Hart

    Can anyone help me please? 3200 RCY problems

    You are right, I do get ABS/ASR fault, but I hadn’t thought they would be related. The manual says both the rear speed sensors faulty. Do you think this is the way to go? Euro spares looks like they’re special order, they are selling secondhand ones
  11. Vince Hart

    Can anyone help me please? 3200 RCY problems

    Thanks for the reply. I’ve just open the page in the manual myself and it’s possible it’s both the rear speed sensors?
  12. Vince Hart

    Can anyone help me please? 3200 RCY problems

    I have just picked the car up from supercar Italia where am I am I have finally read the codes, fault code, P0070. I’m not sure if this is related to my issue that is my RCY warning light on the dashboard. There’s normally only comes on when I’m on the bypass or a motorway and it automatically...
  13. Vince Hart

    Rear shock absorber removal

    Hi Nick no I didn’t need to drop the full tank in the end I did take off the fuel filter and made it slightly easier. I ended up using lots of extension bars and I managed to loosen one of the two nuts. But the last one at the back was really challenging and it was getting late and I was...
  14. Vince Hart

    Rear shock absorber removal

    Thanks for your response, I have tried absolutely everything but as you say I think maybe drop the tanks going to be the only way
  15. Vince Hart

    Rear shock absorber removal

    Some advice please. Iam replacing the springs on the rear of the 3200. The left hand side been no problem and I managed to release the four Nuts at the top of the shock absorber using my left hand all came out fairly easily. The right hand side is another issue I’ve managed to release two but I...