Replacing front door speaker covers Gransport

[Geofflyn]

Hi folks I managed to stick my knee through the drivers side speaker cover in my GS. No problem getting a replacement but can anyone tell me how toremove and replace this cover? Thanks. Geoff

 

[BennyD]

On my spyder there is a fixed tang at the 12 o'clock position and 2 moveable catches at the 4 and 8 o'clock positions. Put a nail file, or similar, in at the 4 and 8 o'clock to disengage the catch and gently lever the cover out. When both catches are disengaged, pull the cover down to slide out the fixed tang and remove the cover. Fitment is the reverse.

 

[conaero]

Yep, just pop off by way of prising the tangs as Benny stated above. Be carful not to mark your leather, put something down there so you can lever off it.

 

[Geofflyn]

Thanks much appreciated. Can't believe I did this after only a week of having the car!! Cheers Geoff

 

[BennyD]

If that's the biggest problem you have got, I wouldn't worry too much!

 

[Geofflyn]

Thanks Benny , I imported the car from the UK and the previous owner was very Fastidious. Maranello looked after the car and by the looks of the receipts anything that even looked liked going wrong was attended to. The car had a factory extended warranty which unfortunately was not transportable to Aust but they did fix a few little things under that warranty for me. Shaun at Maranello was terrific. Maranello put the car on their equipment and gave me a full SD3 printout prior to handing the car to my shipping agent. Is there anywhere I can check each actual reading against a standard? Cheers and thanks again. Geoff

 

[adam01]

Thanks Benny , I imported the car from the UK and the previous owner was very Fastidious. Maranello looked after the car and by the looks of the receipts anything that even looked liked going wrong was attended to. The car had a factory extended warranty which unfortunately was not transportable to Aust but they did fix a few little things under that warranty for me. Shaun at Maranello was terrific. Maranello put the car on their equipment and gave me a full SD3 printout prior to handing the car to my shipping agent. Is there anywhere I can check each actual reading against a standard? Cheers and thanks again. Geoff

U should have asked yesterday when u were out to see me- I had my readout

Give me a call AH