Have been stuck at home with workers in fixing my ceiling so took this opportunity to come at this again.
Uninstalled all the ftdi stuff, installed the driver then reinstalled via the ftdi link. Plugged in the lead and same again.
Still getting "application failed to start because FTD2XX.dll was not found" message. Opened the cable up but writing was too small to read on chips however advert clearly says ftdi.... http://www.ebay.co.uk/itm/***-KKL-U...566309?hash=item4175c2ab25:g:A5YAAOxy7nNTVq3Z
I need help guys. Do I give up with the "sat in the drawer" for 4 years vista laptop and get something else, buy different cables, or is there something wrong with the downloads? or what else!......I'm at the end of my very limited IT knowledge with this so an idiots step by step might help (and when I say step by step, I mean step by step from pushing power button on laptop to plugging in lead!)
This is about more than identifying the current CEL, I always knew at some point I'd need to have a reader to identify if a CEL was an easy enough fix that my Alfa mechanic could do the fix (knocks for instance) or if I needed to take her to Phil as a specialist because without having that fallback I can't justify taking her nearly 500 miles every time I have a problem....
Recognise those same ftd2xxdll files from the ftd download so can't figure why I keep getting an error message saying it is not there?
Re chip in lead. Writing was too small to read direct so took a pic and zoomed. Can't see ftdi on either chip. One has WH ch3401 over 202686303 and the other chip has DNWYSSR G4 over LM339 ...........yet it is advertised as ftdi, does this mean it is not?
Cheers Phil. Guess from what you say the first step is a search for a correct cable. the link I followed for the cable, is that the same one you use? Also if there is an ex 32 owner out there with proven cables gathering dust, drop me a PM.First off check they are there and if not copy them to the correct location. Set Teamviewer up on your computer and I will connect and take a look.
It sounds like your cable doesn't have the correct Chipset.
Ok. After a breather to regroup on this I plan to put the laptop to a computer tech to get him to clear it and reset it then get him to download the software as on the unidiag link since I still think the weak link here is probably my IT skills
The cable I bought does not now seem to have an FTDI chip in it so I need to locate one that is confirmed as FTDI. Does anyone have one lying about in their garage they no longer need or have a link to a cable they have bought, which works and that is confirmed as FTDI? For info, the cable I bought is on below link and although in the detail is says FTDI, neither of the chips have FTDI on them.
Marci seems to be running fine since the throttle reset (thanks Phil, in 3 years of ownership I had never heard of, or needed to use this!) but the CEL remains on, so slightly nervous every time I turn the key or drive her.
http://www.ebay.co.uk/itm/***-KKL-U...566309?hash=item4175c2ab25:g:A5YAAOxy7nNTVq3Z
I need to wait for a replacement battery, this one not holding a charge....works fine when plugged in was going to use that lad in Dingwall but if you know someone who knows their stuff would prefer a recommendation to just yellow pagesGreg,
If you need an IT tech locally I can point you in the right direction if you don't have one lined up.
Super efficient and much cheapness!
Glad to have helped, the CEL can stay on until it is cleared, I've seen it before but the software will allow you to do that. I am happy to send you my cable to test it with and then send it back to me once you are done? I have not driven the 3200 for a month now.
I would contact the Ebay seller once you have tested my cable (known working ) and then get them to refund you.
Have his number in the office so if you can wait until Monday I will ping it over to you.
For those in the know, does this look the correct cable?
https://www.amazon.co.uk/Diagnostic...=UTF8&qid=1467101014&sr=8-2&keywords=***+FTDI