Led mini fuse kits

mjheathcote

Centenary Club
Messages
9,038
I have just fitted my kit from the first group buy. Nice of Maserati not to leave a fuse puller anywhere...if they have, couldn't find it...so nicked one from one of the lesser cars on the drive! Comments as follows:

It depends on what you have on your car, but some full kits may require 42 fuses instead of 38, I have a few spares if that is the case.

Yes mine has 42 fuses in the footwell, so have 4 fuses missing.
The missing ones are:
7.5A x 2
25A x 1
30A x 1

Which would make the footwell kit as below, amended in bold brackets:

Full Kit

5A x 4
7.5A x 4 (this should be 6-off)
10A x 10
15A x 11
20A x 2
30A x 7 (this should be 8-off)
(25A x 1 Also required)

I've checked with my first generation 4200 handbook, and also a downloaded facelift 4200 handbook, and they are the same. Maybe the GranSport has 4 less fuses.

Additionally I would recommend the following to cover the fuses in the boot:

30A x 3
25A x 1
20A x 1
15A x 1
7.5A x 2

That would leave the big MAXI fuses, but I think if one of those blows, you have a bigger problem!
The kit is great value for money, thanks Rob.
I'll send a PM as would like to 'top-up' my original kit if possible based on the above, for the 4 missing fuses to make 42 instead of 38, and the boot fuses.
 

mjheathcote

Centenary Club
Messages
9,038
Interesting. I did the initial count, was sure I took it from the manual.

C

Yep definately 42 not 38 (4200), see photo below and the 4 original fuses still in place with the rating on the top.
Also the boot fuses, 8-off mini fuses, that I would also recommended are swapped, to be complete.
 

Attachments

  • 2015-04-23 14.46.38.jpg
    2015-04-23 14.46.38.jpg
    101.6 KB · Views: 8
  • 2015-04-23 14.55.00.jpg
    2015-04-23 14.55.00.jpg
    89.4 KB · Views: 7