sospanbach
Junior Member
- Messages
- 119
going to check my end float the weekend visually no movement but a gauge will be rigged and we will see, car runs like a dream hopefully all is good let you all know regards dave
End float - an update
- Thread starter Billy3200
- Start date
jasst
Member
- Messages
- 2,319
Sure Tim told me the endfloat on that one was measured in mm, not .mm ! saw it on ebay the other week.
alfatwo
Member
- Messages
- 5,517
alfatwo
Member
- Messages
- 5,517
Mine did too, there were no indications of anything wrong
If there's any discernible movement the thrust bearings will be worn.. Its not the end of the world though.
Dave
RW3200
Junior Member
- Messages
- 295
Glad to read you're back on the roads again. Have nothing but praise for your determination to stick with it and also to Emblem for what looks like an exceptional job on the rebuild.
Here's to many miles of pure adrenaline inducing joy for many years to come. As for the monetary side I'm sure you will get something far more valuable in return with research showing the life affirming benefits of owning such an emotive and endorphin generating machine.
Forza 3200gt!!
R
Here's to many miles of pure adrenaline inducing joy for many years to come. As for the monetary side I'm sure you will get something far more valuable in return with research showing the life affirming benefits of owning such an emotive and endorphin generating machine.
Forza 3200gt!!
R
alfatwo
Member
- Messages
- 5,517
I found mine so much quicker than before with the valve timing now set correctly, I went to back for an oil and filter change after around 300 miles
Have fun and avoid towns!
Dave