1. EasyMAS PDF Reports are stored in the desktop folder named "EasyMAS Workshop" There are then sub folders for each ECU Report, so in this case under "NQS Reports" is for the for cluster.
2. Update version 1.0.8 available very soon which addresses the QP module selection including some minor fixes and improvements.
Service History PDF Report example :-
View attachment 85301
Work in progress >>>
M139 / M145 Parking Sensor System
M139 / M145 Tyre Pressure Monitoring System
M138 Airbag
M138 ABS
Regards
Can the system enable sports setting on a GS but without the stiff suspension?
Thank you... sadly it was not a factory option either... more visits to dentist then!That is a factory vehicle configuration setting, it would need a new Proxi file from the manufacturer but would have to be a standard option for them ? If such a file is obtained then it’s needs to be uploaded to the body computer. EasyMAS does not currently have that option.
Regards
Think I have answered my own question. If fluid is seen in the actuator low pressure return line the bleed screws are loose or the actuator seals are passing.Just ready to release a new EasyMAS version with F1 Clutch and Actuator Bleed routines.
Just a question on a few actuator mysteries, or at least not very well documented.
1. The 3 actuator bleed screws would appear to open internal fluid bypasses and do not allow fluid to exit the bleed screw like clutch bleeding?
2. The actuator has a low pressure fluid return line. Is this for internal leakage or the fluid return for actuator bleeding?
Regards
Hello, is air bag reset possible yet on the 42/GS?
EDIT :-EasyMAS Version 1.1.2 released :-
The Bluetooth Read/Write system -
F1 Clutch Bleeding.
F1 Gearbox Actuator Bleeding.
EasyMAS owners can download the latest version via their account.
Note :-
The USB Read only system will be retired when stocks are exhausted.
We have 2 left in stock.
The reason is firmware capability as the USB system units cannot communicate with the M138 Airbag and early M138 ABS etc.
The USB Read only system will work the same as the Bluetooth Read only system for all the other EasyMAS supported ECU’s.
Software for the USB Read only system with still have updates within its capability.
Regards