Clutch shopping list

[colonelk]

Being a bit of a parts hoarder Id like to get the bits required for a clutch change in my 4200 cc. Its a 53 plate.

Judging from the hooting noise i get occasionally i am reliably informed that I will need spigot bearing replacing at the next change.

Can anyone provide a list of bits needed for a full clutch change. Im pretty sure ive seen it before but my searches are fruitless!

Any cheap sources also appreciated!

 

[Mr K]

As it's a CC you need access to an SD2/3 to do this job. Needed for fluid bleeding and PIS setting. So you'll be going to a specialist. They won't guarantee the parts you provide, so if they mess up or your parts fail prematurely, you'll be paying for the job to be done again. Speak to one or two of the them before shelling out on parts.

You have time on your side if you're just getting the occasional noise when cold. Worth doing early IMO, before the clutch is worn out as you'll have the best chance of your flywheel being in good condition if it hasn't started slipping.