Center caps GTS/QP

[ChrisQP09]

I want to replace my oem center caps with a non oem so I can place custom domed sticker on top.

Does anyone know who manufactures oem ones as sizing appears non standard. Im getting ext diameter of 55mm and internal from clip to clip of 45mm.

Struggling to find a cap of that size and ideally a flat surface

 

[Grantoonriusmo]

You'll find most, if not all non OEM one's will be like the one on the left in the picture.

After trying different one's and searching for weeks on end. I eventually just used the old caps, cleaned them and put new stickers on top. Worked a treat.

 

[will-w]

You’re going to laugh at me for this - but give a bit of research into Abarth centre caps, from a 595 or Punto car with “Esseesse” wheels.

The caps used on these were the same size as the ones used on the Edizione Maserati car, which had Maserati part numbered centre caps.

They made a normal cap the same size which had a gel sticker on top of a flat plastic cap. It might do the trick, and should be pretty cheap.

 

[ChrisQP09]

You'll find most, if not all non OEM one's will be like the one on the left in the picture.

After trying different one's and searching for weeks on end. I eventually just used the old caps, cleaned them and put new stickers on top. Worked a treat.

The oem is slightly domed with maserati logo rising above surface level, were you able to apply the sticker over it with no issues reaching all parts of the contact surface.

 

[ChrisQP09]

You’re going to laugh at me for this - but give a bit of research into Abarth centre caps, from a 595 or Punto car with “Esseesse” wheels.

The caps used on these were the same size as the ones used on the Edizione Maserati car, which had Maserati part numbered centre caps.

They made a normal cap the same size which had a gel sticker on top of a flat plastic cap. It might do the trick, and should be pretty cheap.

Will defo try that too

 

[Grantoonriusmo]

The oem is slightly domed with maserati logo rising above surface level, were you able to apply the sticker over it with no issues reaching all parts of the contact surface.

Yes. There were no issues. I have some spares and I'll try and remember to get a photo for you. But I'm pretty sure the stickers are domed.

 

[ChrisQP09]

You’re going to laugh at me for this - but give a bit of research into Abarth centre caps, from a 595 or Punto car with “Esseesse” wheels.

The caps used on these were the same size as the ones used on the Edizione Maserati car, which had Maserati part numbered centre caps.

They made a normal cap the same size which had a gel sticker on top of a flat plastic cap. It might do the trick, and should be pretty cheap.

Found those center caps, just unsure whether they are domes or flat so that my new domes stickers can be overlayed.