Badge positions

[jemgee]

I am about to replace missing pininfarina front wing badges. Can anyone give me the height above the lower panel joint please.

Having just had both rear wings refinished I also need to buy new badges. I assume these are fitted on centre line of the rear door windows and centred between the rear window and the rear door window.

As I don't have access to a similar QP any assistance would be gratefully received

 

[conaero]

Can you not use the one on the other wing as a reference?

 

[jemgee]

No both were missing when I bought the car

 

[conaero]

Unfortunately my Strad does not have them...ok, taking weight saving to a new level.

Someone will be along shortly with a QP that can help you.

 

[Wanderer]

I am about to replace missing pininfarina front wing badges. Can anyone give me the height above the lower panel joint please.

Having just had both rear wings refinished I also need to buy new badges. I assume these are fitted on centre line of the rear door windows and centred between the rear window and the rear door window.

As I don't have access to a similar QP any assistance would be gratefully received

Mine are;

Pininfarina badge = 10cms from bottom of script to lower wing edge, and 13cms from front door leading edge

Tridents = hard to measure but I got 17cms in straight line from 'kink' where door meets rear wing at glass level, from that edge to arrow head on badge. 42cms from bottom of badge to highest point of wheel arch.

Quick job cos it's cold out there!

 

[jemgee]

Thanks so much. As you say its a mite chilly. I will get some peelable tape in place otherwise you need 2 pairs of hands. I presume the factory have a template ☺