lozcb
Member
- Messages
- 12,586
STEP 4
Remove the larger speaker by gently prising off the cover to reveal the speaker held in by 4 screws undo these and remove the speaker carefully, undo the electrical connector this will reveal another two fixing screws
Below is a step by sep guide to removing the doorcard from a 4200 & GranSport. The 3200 is very similar but not identical.
The 3200 does not have the thin plastic trim in STEP 1 but you just remove the oval panel in the same location, by prising it up.
Ideal for access to:
Tools needed Phillips screw driver prising tool and a felt pad
STEP 1
Remove the long thin metal strip as in Fig 1, you will see one end has a very small slot , this will enable you g to get a small prising tool in there and with a felt pad to protect your leather lever the end out , its held in with spring clips so gently ease it out making sure not to bend it , once out it will reveal 4 fixing screws:
STEP 2
Remove the red reflector lens by again prising it out , again this will reveal another fixing screw:
STEP 3
Remove the small speaker by gently prising it out to reveal yet another fixing screw undo the electrical connector and then do the same for the larger speaker:
STEP 5
Remove the small rectangular cover behind the door handle by prising it out with the slot provided , this will reveal a small self tapping screw , remove that and the plastic handle surround by gently prizing it out, to reveal yet another fixing screw:
STEP 6
Remove the clear plastic light at the bottom underside of the doorcard by prising it out a little then sliding it either forwards or backwards then disconnect the connector:
STEP 7
Remove the single fixing screw underneath the centre of the armrest:
STEP 8
Remove the 4 fixing screws that run along the bottom of the doorcard:
STEP 9
You are now ready to remove the doorcard , gently but firmly wriggle the doorcard upwards and it will become free:
STEP 10
Replace in the reverse order.
Remove the larger speaker by gently prising off the cover to reveal the speaker held in by 4 screws undo these and remove the speaker carefully, undo the electrical connector this will reveal another two fixing screws
Below is a step by sep guide to removing the doorcard from a 4200 & GranSport. The 3200 is very similar but not identical.
The 3200 does not have the thin plastic trim in STEP 1 but you just remove the oval panel in the same location, by prising it up.
Ideal for access to:
- Speaker change
- Window adjustment
- Window /handle micro switches
- Wing Mirror removal
- Door airbags
Tools needed Phillips screw driver prising tool and a felt pad
STEP 1
Remove the long thin metal strip as in Fig 1, you will see one end has a very small slot , this will enable you g to get a small prising tool in there and with a felt pad to protect your leather lever the end out , its held in with spring clips so gently ease it out making sure not to bend it , once out it will reveal 4 fixing screws:
STEP 2
Remove the red reflector lens by again prising it out , again this will reveal another fixing screw:
STEP 3
Remove the small speaker by gently prising it out to reveal yet another fixing screw undo the electrical connector and then do the same for the larger speaker:
STEP 5
Remove the small rectangular cover behind the door handle by prising it out with the slot provided , this will reveal a small self tapping screw , remove that and the plastic handle surround by gently prizing it out, to reveal yet another fixing screw:
STEP 6
Remove the clear plastic light at the bottom underside of the doorcard by prising it out a little then sliding it either forwards or backwards then disconnect the connector:
STEP 7
Remove the single fixing screw underneath the centre of the armrest:
STEP 8
Remove the 4 fixing screws that run along the bottom of the doorcard:
STEP 9
You are now ready to remove the doorcard , gently but firmly wriggle the doorcard upwards and it will become free:
STEP 10
Replace in the reverse order.
Last edited: