deano
Junior Member
- Messages
- 235
Hi, i am hopeing you maybe sble to help me, over the years ive had various throttle issues with this car, and the most recent is complete loss of throttle responce,
I cannot believe the throttle body has failed again so ive fitted a contactless pedal potentiometer and still have no responce,
Having looked further into this the block connect on the loom side for the pedal potentiometer appears to have what i think is non OEM wireing, as in there are 2 grey wires going off to the ECU from pins 3 & 6. There is also 1 grey wire that has been tapped up in this loom as can be seen in the images this has a 5 volt supply with ignition on, can anybody suggest as to why this has been done and the bestway to rectify,Whilst in this area i have the following
Pin 3 grey 0 volts ign off and 0.006 on
Pin 6 grey 0 volts ign off and 0.006 on
Pin 5 red 0 volts ign off and 5 volts on
Pin 4 red/orange 0 volts ifn off and 0.006 on
Pin 1 red 0 volts ign off and 5 volts on
Pin 2 red/green 0volts ign off and0.007on
Help please
I cannot believe the throttle body has failed again so ive fitted a contactless pedal potentiometer and still have no responce,
Having looked further into this the block connect on the loom side for the pedal potentiometer appears to have what i think is non OEM wireing, as in there are 2 grey wires going off to the ECU from pins 3 & 6. There is also 1 grey wire that has been tapped up in this loom as can be seen in the images this has a 5 volt supply with ignition on, can anybody suggest as to why this has been done and the bestway to rectify,Whilst in this area i have the following
Pin 3 grey 0 volts ign off and 0.006 on
Pin 6 grey 0 volts ign off and 0.006 on
Pin 5 red 0 volts ign off and 5 volts on
Pin 4 red/orange 0 volts ifn off and 0.006 on
Pin 1 red 0 volts ign off and 5 volts on
Pin 2 red/green 0volts ign off and0.007on
Help please