What model is this Biturbo ?

Maki

New Member
Messages
6
Im trying to figure out if my Maserati Biturbo from 1987 is a Si model or a 222 model or even just a regual i model.
The car has a 2.0L fuel injection V6 now my confusion is that on the back the badges say 222 Si, then again the badges on the front (on the grill) say Biturbo i...Screenshot_20261018_112838_com.google.android.apps.photos.jpgScreenshot_20261018_112851_com.google.android.apps.photos.jpgIMG_20261013_150534~2.jpg
 
The 222 was introduced in 1988 so if your car is from 1987 it is unlikely to be a 222. The 222 never had an “i” badge because all were fuel injected so there was no requirement to differentiate between versions, early cars were just badged “222”. Later on there were “SE”, “SR” and “4v” versions. The badges on your car are not original, there were never badges on the front grille for any version and it cannot be both a 222 and an Si, it’s one or the other, or as detailed below, it might be neither.

From the pictures and information supplied, I think we can narrow the identity down to either a Biturbo i (introduced in mid 1986) or a Biturbo Si (introduced in 1987). Many cars are changed over the years and this can lead to confusion over identity. An early Biturbo i would not usually have bonnet vents as they don’t have intercoolers, but they were introduced later on. As a result the car could be either a Biturbo i or an Si. However, monotone white would be very unusual for an Si, most were two tone with dark grey on the lower half.

Probably the most conclusive way to identify the car is to look at the engine code on the chassis plate. Whilst both the Biturbo i and Biturbo Si share the same basic 2 litre engine architecture, the two different versions have different engine codes; AM470 for the Biturbo i, AM471 for the Biturbo Si.

If you could show some photos of the engine bay and interior that would also help with identity.
 
Last edited:
Ok thank you, we can confirm that the car has intercoolers and is fuel injected so that confirms the initial thoughts that it’s a Biturbo i or an Si. Having now seen that your car has a honeycomb style grille and the window surrounds are black, we are leaning towards the car being an Si. The interior materials also lean me towards thinking the car is an Si, a 2 litre Italian domestic market Biturbo i would often feature Missoni fabric or velour trim. An all white Si would be unusual but not unheard of. Have a look at the plate highlighted and see if you can find the engine code, if your car is an Si it will have AM471.IMG_0281.jpeg
 
Last edited:
Here is the plate, although i am a bit confused since the engine code on the plate says it's AM453 so a 2.5L V6 ?!


But then the old italian registration papers say its a AM471 with a 1996cc so 2.0L V6 engine, and the new papers here also say its a AM471.

Then i checked the vin numbers and they all match all the papers plates every vin is exactly the same (well everything except the engine code)


ANY INFORMATION HELPS

IMG_20261102_161549.jpgIMG_20261102_161540.jpg
 
Last edited:
Ok we can confirm the details from the chassis number:
ZAM - Maserati
331 - Biturbo
B - left hand drive export market
00 - filler digits
H - built in 1987
B - manufactured in Milan (at Innocenti)
116178 - your car’s unique identity

with the above information we know the car is an export market car and therefore has the 2.5 litre engine as confirmed by the engine type (AM453) on the chassis plate. Italian domestic market 2 litre cars would have the following chassis number sequence
ZAM331O00HBxxxxxx or
ZAM331A00HBxxxxxx.

We can also see that the Version is “331B25”, 331 tells us that the car is a 2 door Biturbo and B25 confirms the engine size of 2.5L

So how does the Italian paperwork state the car has a 2 litre engine? In the 1980s a number of clients wanted the export market versions with the larger engine and through back handed deals would ask the supplying dealer to order a 2.5 litre car but to complete the registration documents as if it was a 2 litre. Administration staff at the Motorizzazione Civile would merely process the paperwork and issue a registration number, dealers were trusted to submit the correct information and nobody would have physically double checked the engine version number to see if it was as it should be. Throughout its life your car has probably just been checked to see that the chassis number on the paperwork matches that on the car. To the average person doing paperwork there’s nothing immediately significant about the engine version number and to anyone who physically sees the car there is almost nothing to visually distinguish a 2 litre from a 2.5. There were also stories of customers buying a 2.5 litre car and “exporting” it but in reality it never left the country. The car was then “re-imported” almost immediately afterwards and the import documentation completed to show the car was a 2 litre.

In conclusion we can say with some certainty that your car is a Biturbo Si 2.5 built for export markets but sold in Italy with documentation “adjusted” to suggest it’s a 2 litre to avoid the 38% tax rate on cars over 2 litres.
 
Last edited:
Ok we can confirm the details from the chassis number:
ZAM - Maserati
331 - Biturbo
B - left hand drive export market
00 - filler digits
H - built in 1987
B - manufactured in Milan (at Innocenti)
116178 - your car’s unique identity

with the above information we know the car is an export market car and therefore has the 2.5 litre engine as confirmed by the engine type on the chassis plate. Italian domestic market 2 litre cars would have the following chassis number sequence
ZAM331O00HBxxxxxx or
ZAM331A00HBxxxxxx

So how does the Italian paperwork state the car has a 2 litre engine? In the 1980s a number of clients wanted the export market versions with the larger engine and through back handed deals would ask the supplying dealer to order a 2.5 litre car but to complete the registration documents as if it was a 2 litre. Administration staff at the Motorizzazione Civile would merely process the paperwork and issue a registration number, dealers were trusted to submit the correct information and nobody would have physically double checked the engine version number to see if it was as it should be. Throughout its life your car has probably just been checked to see that the chassis number on the paperwork matches that on the car. To the average person doing paperwork there’s nothing immediately significant about the engine version number and to anyone who physically sees the car there is almost nothing to visually distinguish a 2 litre from a 2.5. There were also stories of customers buying a 2.5 litre car and “exporting” it but in reality it never left the country. The car was then “re-imported” almost immediately afterwards and the import documentation completed to show the car was a 2 litre.

In conclusion we can say with some certainty that your car is a Biturbo Si 2.5 built for export markets but sold in Italy with documentation “adjusted” to suggest it’s a 2 litre to avoid the 38% tax rate on cars over 2 litres.
Thank you very much, first of all for your time , i spent hours researching the Maserati Biturbo watching documentary videos, researching old newspapers, researching it on the internet and such stuff but didn't get much information since there were a lot of different variants of the Biturbo. Again thank you for your help and knowledge, i really appreciate it.
 
Thank you very much, first of all for your time , i spent hours researching the Maserati Biturbo watching documentary videos, researching old newspapers, researching it on the internet and such stuff but didn't get much information since there were a lot of different variants of the Biturbo. Again thank you for your help and knowledge, i really appreciate it.
You’re welcome, enjoy the car, it looks very nice
 
You’re welcome, enjoy the car, it looks very nice
Hello its me again im sorry for asking (i hope im not annoying, im just clueless) but the other day while i was checking engine codes and whatnot on my Biturbo i saw a stamp on the Left cylinder head and it said S9VM+CU, from my researching it came up as a cylinder head for the 2.0L variant of the Biturbo SI not the 2.5L ?!

My only conclusion is that the car came as a 2.5L (AM453) and then that engine got replaced by a 2.0L (AM471) ?!
Or did the 2.0 and the 2.5 use the same cylinder heads, tho i doubt that...
 
Last edited:
Hello its me again im sorry for asking (i hope im not annoying, im just clueless) but the other day while i was checking engine codes and whatnot on my Biturbo i saw a stamp on the Left cylinder head and it said S9VM+CU, from my researching it came up as a cylinder head for the 2.0L variant of the Biturbo SI not the 2.5L ?!

My only conclusion is that the car came as a 2.5L (AM453) and then that engine got replaced by a 2.0L (AM471) ?!
Or did the 2.0 and the 2.5 use the same cylinder heads, tho i doubt that...

It’s possible that your car has had a replacement engine, have a look for the engine number, it’s located as shown in these photos. The engine number will confirm which engine you have fitted to the car:IMG_0367.jpeg

IMG_0368.jpeg
 
The factory will have a record of the original engine number for your chassis. So if you contact them with both your chassis and engine numbers, there’ll confirm whether it’s a match, and what model you have.
The person to contact is Fabio Collina, the manager of the Archivio Storica Maserati.
 
Top