Water leak fixed (not from the drainage pipe)

abyss

Junior Member
Messages
108
I parked my GS outside of the garage few months ago for few nights (car is always garaged during my last 3 years ownership). It ended up with water puddle inside the passanger footwell.

I dismantled almost everything from back seat to front seat. Checked the famous drainage tube which has already been cut and fixed. Checked the pollen fiter which is bone dry.

Finally i got my wife hosing down the car when i was inside the car with a touch. I found the leak was from the passange front end next the fuse box. It turned out there is a hole inside the chassis joint. There are factory sealant around it but looks like was a miss spot. That area is directly under the front windshield water drainage holes. Thanks to the Maserati QC department.

I fixed it with some Sikaflex polyurethane and water tested.

I hope this will help anyone experiences similar the thing. See attached photos.
 

Attachments

  • uploadfromtaptalk1420599286175.jpg
    uploadfromtaptalk1420599286175.jpg
    96.6 KB · Views: 29
  • uploadfromtaptalk1420599325908.jpg
    uploadfromtaptalk1420599325908.jpg
    88.4 KB · Views: 27
  • uploadfromtaptalk1420599357537.jpg
    uploadfromtaptalk1420599357537.jpg
    88.8 KB · Views: 28
  • uploadfromtaptalk1420599487914.jpg
    uploadfromtaptalk1420599487914.jpg
    83 KB · Views: 28
  • uploadfromtaptalk1420599519515.jpg
    uploadfromtaptalk1420599519515.jpg
    69.5 KB · Views: 29

abyss

Junior Member
Messages
108
The water went inside the cabin from here.
 

Attachments

  • uploadfromtaptalk1420599722195.jpg
    uploadfromtaptalk1420599722195.jpg
    93.3 KB · Views: 36

Cooolcarl

New Member
Messages
8
Could you tell me where you sealed it please.
I have the exact same problem, and can squirt water directly down the 20 odd holes around the bonnet hinge area,
And water seeps into the metal folds of the inside of the car, by the bonnet release catch.
I know that's the opposite side to your car, but I'm guessing it's the same principle ?
Thanks in advance
 

abyss

Junior Member
Messages
108
uploadfromtaptalk1438984776774.jpguploadfromtaptalk1438984796650.jpg

Ive circled amd pointed the area needs to be sealed.

Sent from my GT-I9506 using Tapatalk