SM GTS Brakes

[Zep]

£99 including new pads? I assume the rears to be the same fitting cost.

Not including pads. People tend to make their own choice of pad material, personally I recommend Ferodo DS performance and can supply them.

 

[Zep]

Rear fitting cost TBC as it is a bit more involved but shouldn’t be too much. I am sure @conaero can comment.

As for spacers etc, there is no reason why they won’t fit.

 

[dickygrace]

How much are the front and rear discs?

 

[Gazcw]

Not including pads. People tend to make their own choice of pad material, personally I recommend Ferodo DS performance and can supply them.

These work well in the wet. Come in various levels from low to super.

 

[Zep]

These work well in the wet. Come in various levels from low to super.

I’m starting to worry about you....

 

[Zep]

How much are the front and rear discs?

There are a lot of options, I will give you a call to discuss.

 

[Gazcw]

I’m starting to worry about you....

View attachment 76186

Said I was bored!

 

[dickygrace]

There are a lot of options, I will give you a call to discuss.

Thanks Zep. Just OEM size and spec 4.7 GT Sport Front & Rear discs please.

 

[Doctor Houx]

Just put new pads on the front of my GC and didn’t realise there is a pad wear sensor on the near side. Wire broke as I pulled it out the pad so have tied it out the way for now.

Not that I rely on them, but would like to replace it as OE spec but can only find one for the 4200 on Scuderia and Euro parts. Anyone have a part number please?

BTW had the corrosion on the disc edges skimmed off and now as good as new as per photo.

 

[Zep]

Just put new pads on the front of my GC and didn’t realise there is a pad wear sensor on the near side. Wire broke as I pulled it out the pad so have tied it out the way for now.

Not that I rely on them, but would like to replace it as OE spec but can only find one for the 4200 on Scuderia and Euro parts. Anyone have a part number please?

BTW had the corrosion on the disc edges skimmed off and now as good as new as per photo. View attachment 76272

You’ll love this. Maserati don’t sell the sensor separate from a set of pads. But it’s a standard type of sensor, only the plug on the connection to the loom changes. I’ve never had to change them as they are not normally worn out, but if you ping up a pic of the plug I am sure I can match it.

 

[Gazcw]

Buy the cheapest you can find that fits then cut, solder and heatshrink the Mas plug on surely.

 

[Doctor Houx]

You’ll love this. Maserati don’t sell the sensor separate from a set of pads. But it’s a standard type of sensor, only the plug on the connection to the loom changes. I’ve never had to change them as they are not normally worn out, but if you ping up a pic of the plug I am sure I can match it.

Thanks. PM sent

 

[Zep]

Buy the cheapest you can find that fits then cut, solder and heatshrink the Mas plug on surely.

As a last resort, yes. I doubt it is that special.

 

[Gazcw]

As a last resort, yes. I doubt it is that special.

If an alternative eludes obviously.

 

[Zep]

Just a quick follow up on this. Pad wear sensors are now available if required.

 

[Doctor Houx]

Sensors supplied by Zep and fitted perfectly today. Thanks Zep

 

[Zep]

Just a little bump. If anyone’s better half’s are going to buy them some massive brake discs for Christmas, an order by the end of this week would be a good idea!

 

[rs48635]

Just a little bump. If anyone’s better half’s are going to buy them some massive brake discs for Christmas, an order by the end of this week would be a good idea!

If I order the brake discs will Santa maybe follow up with a scruffy GTS in my stocking?

 

[rs48635]

Image shared by Zep. Shows a spacer fitted.
View attachment 76174

Loving the look of these callipers, what finish is this?
appears to be polished /lacquered rather than paint or powder coat.

 

[Zep]

If I order the brake discs will Santa maybe follow up with a scruffy GTS in my stocking?

I suppose it is dependent on how naughty or nice you have been I suppose!