Radio Issue 2007 Quattroporte

snjbuu

New Member
Messages
4
Hi folks , I have some troubles with my radio settings. I only can get the screen as in picture 1 ( bleu) . As you can see I have not the option "settings" as can be seen in the other picture . This pic is taken from the radio manual ( which is Japanese so I can't read it....).
My question is : Does anybody recognises the screen in picture 1 and how to get out of that screen ??CIMG0009.JPGCIMG0010.JPG
 

Harvey_Tim

Member
Messages
211
Nothing happens then.....
Does anything work, can you scroll up and down the other options?

What screen are you hoping to get to?. I am not with the car right now so I cannot check, but from memory other than the sub screens from the options you have shown I think the only other screen for the Radio is the one that just shows the selected station and has no options.
 

snjbuu

New Member
Messages
4
Does anything work, can you scroll up and down the other options?

What screen are you hoping to get to?. I am not with the car right now so I cannot check, but from memory other than the sub screens from the options you have shown I think the only other screen for the Radio is the one that just shows the selected station and has no options.
I hope to get the screen in pic 2 but only get Pic1 ( bleu one) . I can only select stations from 80 to 89 Mhz. I can select the other options but cannot get out of the 80 -89 Mhz range. As can be seen on pic1 it's P3 (page 3 I think) so there must be more pages. Also can be seen that in pic1 there is the subject "traffic info" on the other pic this is "settings" . I assume I must have the subject "settings"to change anything but I absolutely cannot get out of this screen ( P3).....
 

Harvey_Tim

Member
Messages
211
If you select “Traffic Info” does it give you a screen that has the options TA, AF and REG ? - if so then I think that is the same as “Settings” on my car, but tomorrow I will check for you.

Is your car by any chance a Japanese import?
 
Last edited:

Harvey_Tim

Member
Messages
211
As can be seen on pic1 it's P3 (page 3 I think) so there must be more pages.
I do not think P3 means page 3, I think it means Program 3 i.e. you have selected the 3rd in your list 88.4mhz if you select a different one from your list such as the last one 81.3mhz does it show P6 instead of P3?