QP6 wheels on QPV

Gazcw

Member
Messages
7,698
Found a nice looking set of qp6 wheels and thinking of changing. They have a different offset and I need to find out the PCD. Width is the same.

So if I am correct I have 52 front and 50.5 offset currently. New is 43 and 45. So that will move them out further into the arches. Am I correct?

Thoughts on the look it will achieve too?
7215772157
 

JJbing

Member
Messages
445
PCD is the same, centre bore is the same, can use your existing bolts, width is the same, offset is lower so you're correct, they should stick further out, which is normally preferred.

I see no reason why they wouldn't fit straight on :) Go for it!
 

Gazcw

Member
Messages
7,698
PCD is the same, centre bore is the same, can use your existing bolts, width is the same, offset is lower so you're correct, they should stick further out, which is normally preferred.

I see no reason why they wouldn't fit straight on :) Go for it!
Unfortunately it was a double posting and they only have 2! :rolleyes:
 

P5Nij

Member
Messages
2,371
Forgive m utter numptiness but is 'PCD' to do with the spacing of / number of bolts...?

Always fancied the idea of a set of 360s from the QPVI on a QPV, whether they'd fit or not is a different matter....

72187
 

Gazcw

Member
Messages
7,698
Forgive m utter numptiness but is 'PCD' to do with the spacing of / number of bolts...?

Always fancied the idea of a set of 360s from the QPVI on a QPV, whether they'd fit or not is a different matter....

View attachment 72187
Yes. 114.3. They are the same as jjbing says. Are they called Chronos or something similar?
 
Last edited: