Poncy puddle lights?

Contigo

Contigo

Sponsor
Messages
18,376
Anyone got a set for a GT then to try? Would look good at the evening weddings on both the GT and Ghibli.
 
conaero

conaero

Forum Owner
Messages
34,630
Contigo said:
That's a cracking shout!
Click to expand...
It’s called weeding. It’s the bit you remove when the plotter has cut the image. Just ask for your logo vinyl cut without the weeding removed.

Or the other method would be to use the logo as a mask and spraypaint over the top but the paint might not be dense enough.

If you use method one, the weeded vinyl make sure you wrap it round the edges of you will get light bleed.
 
Scaf

Scaf

Member
Messages
6,573
I have a set of trident ones but not fitted them yet.
Really only bought them as I managed to break one of the originals but had second thoughts hense never fitted them.
 
Last edited by a moderator:
Andyk

Andyk

Member
Messages
61,153
You can get them as an option on a few Marques now....Jaguar for one........I think I agree with the remark above...Tat.
 
Vampyrebat

Vampyrebat

Member
Messages
3,129
conaero said:
It’s called weeding. It’s the bit you remove when the plotter has cut the image. Just ask for your logo vinyl cut without the weeding removed.

Or the other method would be to use the logo as a mask and spraypaint over the top but the paint might not be dense enough.

If you use method one, the weeded vinyl make sure you wrap it round the edges of you will get light bleed.
Click to expand...
I used to work for a sign company many moons ago as a designer and illustrator, and I did lots of this work also for company vans etc. I still do the odd job now and then but do it all by hand with a scalpel. I still have loads of vinyl and fanny paper left. So if anyone needs a custom cut out for something like this just let me know.
 
sionie1

sionie1

Member
Messages
1,316
I like them, been looking at adding them for a while. But then I have a pimp interior according to some, so it’s of a theme..
 
JonW

JonW

Member
Messages
3,262
Ewan said:
I bought a Chinese set for a GranTurismo, but they don't quite fit (being slightly too short to fill the opening). Myles at Emblem thinks they may fit a 4200/GranSport instead. I'm happy to sell them on if anyone's interested.

(They obviously could be made to fit the GT by simply setting them into a slightly bigger surround, but Myles didn't have the will do this, and neither do I.)

Oh. And these, also, are not the poncy ones.
Click to expand...
Ewan - do you have a pic of what the lights would look like?
 
You must log in or register to reply here.