Larini ?

Saigon

Member
Messages
778
I want to purchase some Larini back boxes for the 4200, is there a Uk dealer /distributor or does everything have to go directly through Larini. I know what I want, have the part number just can’t find a supplier in Uk. Any info much appreciated, thanks.
 

FIFTY

Member
Messages
3,100
Yes go through the above link from jaast

They are also the UK agent for formula dynamics
 

Saigon

Member
Messages
778
Yes go through the above link from jaast

They are also the UK agent for formula dynamics
Thanks guys for all the info, had some delivered yesterday, pity they will be hidden away as they look so good. I went up to my local tyre and exhaust center and they didn’t want to know, too complicated to install, may have to remove this and that to fit them, what a load of Bo##0x . So went to a local exhaust specialist dealing in just manufacturing and fitting exhausts, who said no problem, it will take an hour, but not til next week, so booked in. Just goes to show these supposedly generic exhaust specialists don’t want to touch anything that they haven’t done before, too much effort and just can’t be bothered. Again thanks for all the effort, much appreciated. By the way the Mrs hasnt seen the invoice yet, just said those look shiny, hope they are not loud.
 

FIFTY

Member
Messages
3,100
I once had the same trouble with trying to get my existing tyres swapped onto some aftermarket rims and the wheels refitted on one of my old cars... fast fit centres are designed for fast turnover on easy jobs at a premium rate. Beyond that good mechanics are hard to come by.

Glad you got it sorted
 

redsonnylee

Member
Messages
1,540
Thanks guys for all the info, had some delivered yesterday, pity they will be hidden away as they look so good. I went up to my local tyre and exhaust center and they didn’t want to know, too complicated to install, may have to remove this and that to fit them, what a load of Bo##0x . So went to a local exhaust specialist dealing in just manufacturing and fitting exhausts, who said no problem, it will take an hour, but not til next week, so booked in. Just goes to show these supposedly generic exhaust specialists don’t want to touch anything that they haven’t done before, too much effort and just can’t be bothered. Again thanks for all the effort, much appreciated. By the way the Mrs hasnt seen the invoice yet, just said those look shiny, hope they are not loud.

Had my valved Larinis installed last week, took two hours as a few bolts were tight to get off and lining up took a bit longer as you have to be careful not to scratch the rear bumper.
 

Zep

Moderator
Messages
9,110
US
 

Attachments

  • 71901431-7A14-443D-A958-8E2A4A119C57.jpeg
    71901431-7A14-443D-A958-8E2A4A119C57.jpeg
    142.8 KB · Views: 14

Zep

Moderator
Messages
9,110
Euro
 

Attachments

  • 90D0CAB2-8815-45CF-BC99-2744C9C6B2C0.jpeg
    90D0CAB2-8815-45CF-BC99-2744C9C6B2C0.jpeg
    167.2 KB · Views: 13

jasst

Member
Messages
2,313
Had my eyes on these for a while, seriously tempted even though the car is not running! not sure about the other bits he is selling, don't look like anything I recognise from a 4200