Gransport Speedo not working

[toole26]

It appears my speedo is not working, everything else on the clocks work fine. Is it as simple as the speedo cable has given up or something else?

Thanks

 

[ofenomeno99]

I just came out of a similar situation with my 4200. Had to get the whole speedo replaced. But it could be anything

 

[RJ237]

No cable, that would be too easy.

 

[conaero]

Check the 3 multi plugs where they plug into the canbus box above the accelerator pedal. Give them a spray up with contact cleaner. The speedo is electrical pulse driven from the ABS sensors.

 

[toole26]

I just came out of a similar situation with my 4200. Had to get the whole speedo replaced. But it could be anything

The whole speedo?

Check the 3 multi plugs where they plug into the canbus box above the accelerator pedal. Give them a spray up with contact cleaner. The speedo is electrical pulse driven from the ABS sensors.

Thanks Matt, I'll give that a go

 

[conaero]

Think the box in question is black with an orange sticker on it saying digitek

 

[conaero]

Here you go, this;

 

[ofenomeno99]

The whole speedo?


Thanks Matt, I'll give that a go

Sorry meant whole cluster. My speedo was sticking though. So if I was accelerating to 60, it would read as 20 then suddenly jump to 60 and same when decelerating. Never showed the true speed.

 

[toole26]

Sorry meant whole cluster. My speedo was sticking though. So if I was accelerating to 60, it would read as 20 then suddenly jump to 60 and same when decelerating. Never showed the true speed.

Aright I see, my one was working fine and now doesn't move

 

[toole26]

Here you go, this;

View attachment 103851

Much appreciated Matt, I'll have a look over the weekend and see if I can locate it.