Ghibli - rear heater vents removal

must go faster

Junior Member
Messages
74
Had to change the rear heater vents as the tabs protruding out of the grills had broken.
Couldn't find anything on line or on the forum about how to do this so thought I’d post a quick guide in case it’s helpful for anyone else.

  1. Use a small flat blades screwdriver to prize out either the blanking plate or climate control panel under the vents.
  2. Remove the 2 Phillips screws securing the base of the vent.
  3. Prize out the top of the vent.
  4. Unplug the wiring connector and remove.
  5. To fit the new part, Connect the wiring then offer it up enough to get the screws started before Clipping the top in and tightening the screws.
  6. Refit blanking/climate panel.

cheers

chris